***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Tue Oct 19, 2010 12:24 pm

Bought myself an HKS exhaust : http://clubcj.net/viewtopic.php?p=153769
Image

"A man who stands for nothing, falls for anything."

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Tue Oct 19, 2010 1:08 pm

I Installed Coils on saturday last week.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
Red EVOX
Lancer VR/GT
Lancer VR/GT
Posts: 202
Joined: Sat Nov 28, 2009 8:24 pm
Location: Mt Gambier

Postby Red EVOX » Tue Oct 19, 2010 1:52 pm

Fitted some new front brakes pads and a couple of new tyres to my evo

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Tue Oct 19, 2010 3:19 pm

Booked her in for her 15,000 service.

Quoted price was $315, told them I've done the oil filter and oil change and that knocked it down to $129. WIN! not bad for $55 Castrol Edge Sport full synth and a $12 ryco filter. That puts me ahead by about $120

Also getting a wheel alignment for $66 and rotate and balance for $33.

I'm chuffed.
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

Paggsy
Lancer Ralliart
Lancer Ralliart
Posts: 558
Joined: Tue Aug 25, 2009 4:21 pm
Location: Unknown

Postby Paggsy » Tue Oct 19, 2010 3:42 pm

Well I just got back from picking up the new rubber... WOW those Advan V103's are really quite.

I'll have a nice little drive on the way home and see how they perform!

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Tue Oct 19, 2010 3:50 pm

I installed these last week. Headlight and fog light tint films.... yes illegal but meh whatever.

Headlight set in "tint" options were smoked (which is dark as), clear, yellow or optic blue and those would stand out too much.

Fog in "yellow" tint

Already got PIAA yellow fog bulbs - just want the yellow look when they're off... :)

I'll take photos of them on another day.

Image
Image
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Tue Oct 19, 2010 6:23 pm

Installed my new (Ofey's old :) ) air dams - look like a VRX now :)

Love having the same colour car as Ofey - Grey is Great....
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Tue Oct 19, 2010 6:57 pm

I Had new reversing lights "Bulbs" Fitted ..Heaps Better ...

Image
Image
Angels Are Sometimes Disguised As Friends

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Wed Oct 20, 2010 8:05 pm

Vac.
Washed with Autogylm Shampoo
Clay barred with Meguires
Washed again with autoglym Shampoo
Removed excess water with my Autoglym Flexi Blade
Chamois Dry.
Applied autoglym Super Resin Polish.
.
Ran out of time to seal it with Autoglym Extra Gloss protection and treat the interior plastics and leather.... oh well. :(

Makes me want to hug my car when it's so shiny. :) (OK, I did).
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

tjoz
Lancer Ralliart
Lancer Ralliart
Posts: 699
Joined: Sun Oct 04, 2009 3:51 pm
Location: Melbourne, Australia

Postby tjoz » Thu Oct 21, 2010 4:48 pm

You should get carbon fiber, so easy to clean. Baked on bird crap not a problem, spray bit of soapy water and that crap wipes up with wipe of a wet cloth. If only the rest of the car was that easy to clean, you just about need a sand blaster just to get the crap off the doors.

---

Put some more kanji stickers on car, one on the boot. Had to make it myself too, havent found anyone that does the two character kanji symbols yet. Single character ones you can get anywhere but not any that are 2+ symbols.

Image

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Thu Oct 21, 2010 5:19 pm

Got her back from Mitsu service (Suttons Arncliffe)
They validated my own oil and filter change.
Got roadside renewed.
Got suttons free car washes for another year.
Topped up my fluids.
Wheel alignment, rotated and rebalanced.
They liked my car, lots.
Didn't say anything about my ClubCJ stickers tho. :cry:

$228 all up. I'm happy.
Also replacing my dicky passenger side air vent. (It wont stay in place, just flops down again).
"the quieter you become, the more you are able to hear"

More pix @ http://clubcj.net/viewtopic.php?t=8779

ImageImage

User avatar
Gleno
Lancer Evolution
Lancer Evolution
Posts: 991
Joined: Sun Sep 05, 2010 12:22 pm
Location: Sydney

Postby Gleno » Thu Oct 21, 2010 5:45 pm

VRX_Pete wrote:Vac.
Washed with Autogylm Shampoo
Clay barred with Meguires
Washed again with autoglym Shampoo
Removed excess water with my Autoglym Flexi Blade
Chamois Dry.
Applied autoglym Super Resin Polish.
.
Ran out of time to seal it with Autoglym Extra Gloss protection and treat the interior plastics and leather.... oh well. :(

Makes me want to hug my car when it's so shiny. :) (OK, I did).


you wash your car any particular way to prevent fine scratches/swirl marks?

Autoglym flexi blade? some kind or chamois?

User avatar
Gleno
Lancer Evolution
Lancer Evolution
Posts: 991
Joined: Sun Sep 05, 2010 12:22 pm
Location: Sydney

Postby Gleno » Thu Oct 21, 2010 5:46 pm

DORA_ANNE wrote:I Had new reversing lights "Bulbs" Fitted ..Heaps Better ...

Image


I like those!!! love the plates as well :)

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Thu Oct 21, 2010 6:01 pm

Installed my alloy fuel door today
Image

Washed my car today aswell
Front View
Image
Side View
Image
View OF the Wheels look how shiny
Image

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Sat Oct 23, 2010 4:55 pm

GlenoCJ wrote:
DORA_ANNE wrote:I Had new reversing lights "Bulbs" Fitted ..Heaps Better ...

Image


I like those!!! love the plates as well :)


@ Glen Thank you for your Kind comments , Iam about to replace my plate bulbs and parkers Then hopefully the Headlights . I Like the white light look .

Regards Doreen :)
Image

Angels Are Sometimes Disguised As Friends


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 177 guests