***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

If you were only limited to 3 exterior mods.

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
Gleno
Lancer Evolution
Lancer Evolution
Posts: 991
Joined: Sun Sep 05, 2010 12:22 pm
Location: Sydney

If you were only limited to 3 exterior mods.

Postby Gleno » Tue Oct 12, 2010 5:08 pm

Which mods would you do if you were only limited to 3?? Im refering to exterior mods only.

For me it would be alloys,front bumber blackout and CF Mirrors.

This should get some people thinking!!! :)

tjoz
Lancer Ralliart
Lancer Ralliart
Posts: 699
Joined: Sun Oct 04, 2009 3:51 pm
Location: Melbourne, Australia

Postby tjoz » Tue Oct 12, 2010 5:17 pm

Is full bodykit considered one mod or 3 (front bar, sides and rear). If not will go with wheels, lowered roof (1.5-2 inches drop) and 2door conversion.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Oct 12, 2010 5:25 pm

For me it'd be:

1. X-Factor's Folding mirrors (though MY11 cars won't need to do it since it comes default) = A$300 or so DIY
2. Lowering springs or coil overs. It's a street car. Not a 4WD. Eibach FTW!!
= A$400 or so + install
3. The OEM alloy fuel door. = A$150 or so DIY

Wonderfully changes the whole appearance of the car... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Itachi
Lancer Evolution
Lancer Evolution
Posts: 776
Joined: Sun Aug 22, 2010 2:49 am
Location: Perth, Australia

Postby Itachi » Tue Oct 12, 2010 5:28 pm

Depends what you start with. For my car (VRX) it would be:
1) Lowered
2) Rear Diffuser/Air Dam to finish off the body kit
3) Sports Grille Upper because I can't stand the plastic that it comes with and everyone does the black out :P

Hmmm...I forgot the sharkfin and chrome fog light rings...too hard lol!
Like my car? Follow my fitness blog!

http://www.littleguylifting.com/

User avatar
Gleno
Lancer Evolution
Lancer Evolution
Posts: 991
Joined: Sun Sep 05, 2010 12:22 pm
Location: Sydney

Postby Gleno » Tue Oct 12, 2010 5:36 pm

tjoz wrote:Is full bodykit considered one mod or 3 (front bar, sides and rear). If not will go with wheels, lowered roof (1.5-2 inches drop) and 2door conversion.


Yeah i guess a full bodykit would be counted as one mod :)

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Tue Oct 12, 2010 5:37 pm

1. vinyl front grills

2. lowered springs

3. painted and chromed fog light surrounds to match grills.

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Tue Oct 12, 2010 5:45 pm

I would consider suspension and wheels to be more performance mods then exterior mods.
So my list for 3 would be:
1) Wide body kit (if they ever make a good one)
2) Carbon fibre Bonnet
3) carbon fibre boot
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
jolly_tas
Lancer Ralliart
Lancer Ralliart
Posts: 524
Joined: Sun May 10, 2009 2:06 pm
Location: Launceston, Tas, Australia
Contact:

Postby jolly_tas » Tue Oct 12, 2010 7:26 pm

1) Lowered
2) Chrome Grill
3) Alloys
Image

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Tue Oct 12, 2010 7:37 pm

(1.) Lowered
(2.) X Factor Mirrors
(3.) Ralliart Bonnet
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Tue Oct 12, 2010 7:39 pm

Lowered
Blackout Front
Alloys (if you don't have them)
. else LED Taillights
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
Hecky
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 474
Joined: Sun Dec 06, 2009 4:22 am
Location: Sydney, Australia

Postby Hecky » Tue Oct 12, 2010 7:40 pm

Wheels
Lowered
Very dark tint
HKS/AMS/GFB/MRT/K&N/DBA
Whiteline/Ultra-Racing/Rexpeed/Autometer/Yokohama Racing/Cusco
...and some other stuff which the fun police don't approve of... :)

User avatar
Big_Lucas
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 335
Joined: Mon Feb 01, 2010 9:11 pm
Location: Australia

Postby Big_Lucas » Tue Oct 12, 2010 7:46 pm

wheels
sacked
paint the whole car candy pink

User avatar
bye2u
Lancer Legend
Lancer Legend
Posts: 1365
Joined: Wed Jan 28, 2009 3:55 am
Location: Sydney, NSW, Australia

Postby bye2u » Tue Oct 12, 2010 7:47 pm

wheels
lowered
cf front lip/side skirt extensions :)

User avatar
M@verik
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 385
Joined: Sat Nov 22, 2008 6:08 pm
Location: JHB, South Africa

Postby M@verik » Tue Oct 12, 2010 8:39 pm

Lowered isnt exactly an exterior mod. More of a performance one I rate.

As for me.
CF Evo Hood
Lightweight forged wheels
Nice rear diffuser. Lol or an evo 9 wing :D
________________________
Image
Past: Nissan Xtrail 2.5
Current: Mitsubishi Lancer 2.0

Weight loss, tuning


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 61 guests