***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Ralliart Floor Mats

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Mitsi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 458
Joined: Wed Sep 22, 2010 12:16 pm
Location: Brisbane, Australia

Ralliart Floor Mats

Postby Mitsi » Wed Sep 29, 2010 1:46 pm

Hi All,

Does anyone know where we can get a set of Ralliart floor mats cheaper than OEM?

Thanks

Megan
2010 Lancer Ralliart <3

User avatar
nixonx
Lancer Newbie
Lancer Newbie
Posts: 85
Joined: Mon Sep 20, 2010 5:25 pm
Location: Brisbane

Postby nixonx » Wed Sep 29, 2010 2:23 pm

try http://www.lancershop.com/customer/prod ... t=0&page=1

Also let me know how it goes because i need some :P

User avatar
liam92
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 306
Joined: Fri Jul 02, 2010 8:47 pm

Postby liam92 » Wed Sep 29, 2010 4:40 pm

I saw the boot one today on there. Im mightily temped because the stock mat never stays where it should!

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Sep 29, 2010 5:03 pm

Just thought I'd let you boys know that the RA mats are also available through me.

MZ360274EX CARPET MAT SET RA Mark
RRP = A$88.90+
CCJ = A$80.00

If you want to move up the ranks and put those marked "Lancer Evolution", we have those too!

MZ360240EX CARPET MAT SET(MANUAL)
RRP= A$75.80+
CCJ = A$70.00

MZ360239EX CARPET MAT SET(SST)
RRP = A$78.80+
CCJ = A$70.00

Just thought I'd add the price of the mats that say simply Lancer which was intended for the NA Lancers:
MZ360243EX OEM Auto Floor Mats = A$75
MZ360244EX OEM MANUAL mats = A$72

So in terms of price of car it's (High to low) : Evo, RA, NA
But in terms of prices of floor mats it's: RA, NA, Evo

perhaps they thought since Evo is a performance car, they skimped out on the material used and its thinner so you get weight savings???


My contact says:

"I can't see why anyone would want to buy the Evo ones. They look drab! Now those RA ones look lurvely!!"
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Wed Sep 29, 2010 5:41 pm

this is for a set of 4, front & rear?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Sep 29, 2010 5:42 pm

For now that's what I've been told!

The NA ones come as a set of 4.
The RA ones come in a set of 4.
No one has ever ordered evo ones though.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Mitsi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 458
Joined: Wed Sep 22, 2010 12:16 pm
Location: Brisbane, Australia

Postby Mitsi » Wed Sep 29, 2010 6:44 pm

Hi Ofey,
PM sent.
2010 Lancer Ralliart <3

X7zBiT
INACTIVE Member Account
Posts: 7
Joined: Mon Oct 25, 2010 12:55 pm
Location: Sydney, Australia

Postby X7zBiT » Tue Oct 26, 2010 11:12 pm

Hey guys, would a ralliart one fit in a 2007 VR model? Thanks.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Oct 26, 2010 11:47 pm

X7zBiT wrote:Hey guys, would a ralliart one fit in a 2007 VR model? Thanks.


Bear in mind that a Ralliart is a SST car (read auto) with 2 pedals. Depends now, do you have a Auto or Manual VR? Cos shape of the driver side footwell is different.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

X7zBiT
INACTIVE Member Account
Posts: 7
Joined: Mon Oct 25, 2010 12:55 pm
Location: Sydney, Australia

Postby X7zBiT » Wed Oct 27, 2010 12:20 am

I have an auto VR, so it should fit just fine?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Oct 27, 2010 3:03 am

yeap
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Wed Oct 27, 2010 8:06 am

ofey wrote:For now that's what I've been told!

The NA ones come as a set of 4.
The RA ones come in a set of 4.
No one has ever ordered evo ones though.


hi ofey havnt i ordered a set of evo ones?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Oct 27, 2010 10:13 am

At that point in time when I posted it, you hadn't ordered and I haven't seen any.

So there was nothing wrong with my post. You're not suggesting I spend time updating all my posts?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Wed Oct 27, 2010 10:40 am

sorry ofey didnt check the date of post, my mistake

X7zBiT
INACTIVE Member Account
Posts: 7
Joined: Mon Oct 25, 2010 12:55 pm
Location: Sydney, Australia

Postby X7zBiT » Fri Oct 29, 2010 7:57 pm

Hey Ofey, PM sent.


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 55 guests