***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
New Member in Melbourne
Moderators: Moderators, Senior Moderators
- Adam Alpine
- INACTIVE Member Account
- Posts: 19
- Joined: Sun Sep 05, 2010 4:43 pm
- Location: Melbourne
New Member in Melbourne
Hi Guys
I have a 2009 VRX with 20" Verde wheels, Pedder's coil overs hope fully the image loaded on my profile
Adam
I have a 2009 VRX with 20" Verde wheels, Pedder's coil overs hope fully the image loaded on my profile
Adam
Adam Alpine
- Adam Alpine
- INACTIVE Member Account
- Posts: 19
- Joined: Sun Sep 05, 2010 4:43 pm
- Location: Melbourne
Thanks Guys
Im located in Oak park around Essendon, as Im a sale rep Im on the road and around most areas! I did once have a card left on my window??
Unfortunately due to family reasons I will have to part with my VRX (cant fit the pram etc) I have just listed it in the web! hopefully I can move it on to a CJ Lover? This car will be missed!
I have tried to load a better picture but not much luck I was using image shack is there a better site to use??
Regards Adam
Im located in Oak park around Essendon, as Im a sale rep Im on the road and around most areas! I did once have a card left on my window??
Unfortunately due to family reasons I will have to part with my VRX (cant fit the pram etc) I have just listed it in the web! hopefully I can move it on to a CJ Lover? This car will be missed!
I have tried to load a better picture but not much luck I was using image shack is there a better site to use??
Regards Adam
Adam Alpine
- Adam Alpine
- INACTIVE Member Account
- Posts: 19
- Joined: Sun Sep 05, 2010 4:43 pm
- Location: Melbourne
- bobcrusader
- Lancer VR/GT
- Posts: 273
- Joined: Thu Nov 19, 2009 10:16 pm
- Location: Melbourne, Australia
- Adam Alpine
- INACTIVE Member Account
- Posts: 19
- Joined: Sun Sep 05, 2010 4:43 pm
- Location: Melbourne
Micheal
that was me! what do you think of the SSV store? that is the best looking car audio store in Australia maybe even better the shops overseas? From what I have seen!
Rob
the 20s are 8.5 inch had lot of rubbing issue but made some adjustment to the front and rear guards and all is now good next time I would recommend 20 x 8!!!
that was me! what do you think of the SSV store? that is the best looking car audio store in Australia maybe even better the shops overseas? From what I have seen!
Rob
the 20s are 8.5 inch had lot of rubbing issue but made some adjustment to the front and rear guards and all is now good next time I would recommend 20 x 8!!!
Adam Alpine
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
Yeah SSV are quite good. I got them to install my headunit. They are the best audio store ive found so far. But I havent really been around to too many places. Ive got a mate who works in JB who always looks after me
I was driving down that sidestreet near SSV and saw a black lancer and im lik oh shiz i better tag it, roll in and its riding on 20" rims. Looked hella tight!!
I thought i recognised your car somewhere
I was driving down that sidestreet near SSV and saw a black lancer and im lik oh shiz i better tag it, roll in and its riding on 20" rims. Looked hella tight!!
I thought i recognised your car somewhere
- Adam Alpine
- INACTIVE Member Account
- Posts: 19
- Joined: Sun Sep 05, 2010 4:43 pm
- Location: Melbourne
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
You were at autosalon werent you?
Check out www.sickbunnyphotos.com and theres some pictures of your car there!!
Check out www.sickbunnyphotos.com and theres some pictures of your car there!!
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
That explains why your VRX has no space for a pram.
I've fitted prams in mine. I've seen people do it... .
Now that I've seen your car, I understand better.
I've fitted prams in mine. I've seen people do it... .
Now that I've seen your car, I understand better.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Who is online
Users browsing this forum: No registered users and 54 guests