***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* BC Coilovers Group Buy Aug 2010
Moderator: Senior Moderators
- RDREDRALLIART
- Lancer Newbie
- Posts: 74
- Joined: Sat Feb 13, 2010 10:58 am
- Location: Baldivis, WA Australia
Hi Sam & ofey,
Yep mine are definatley 6/4.
When I did initialy order from Henry he did email me to say he had no stock & his local "supplier" was out so he airfreighted them in from the USA, he initiallly thought the spring rates were a mistake untill further investigation
also see http://www.darksideengineering.com/prod ... -br-series
Hopefully will be able to let you know how the 6/4 feels this weekend.
Cheers
Ross
Yep mine are definatley 6/4.
When I did initialy order from Henry he did email me to say he had no stock & his local "supplier" was out so he airfreighted them in from the USA, he initiallly thought the spring rates were a mistake untill further investigation
also see http://www.darksideengineering.com/prod ... -br-series
Hopefully will be able to let you know how the 6/4 feels this weekend.
Cheers
Ross
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Ross, thanks for your information. Most certainly please let me know how the 6/4 feels. I'm wondering if I should take a plunge to 7/5 but I do carry my family with me and don't want them to complain about the hard ride.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
My BCs are the same as Rick's
7KG front 5KG rear
Car rides well at these rates with 10 clicks on the damper from 0 setting
Trackwork Damping will be ramped up in increments until I find a happy medium,I would highly recommend them
Great value for money including adjustable pillow tops for camber adjustments
7KG front 5KG rear
Car rides well at these rates with 10 clicks on the damper from 0 setting
Trackwork Damping will be ramped up in increments until I find a happy medium,I would highly recommend them
Great value for money including adjustable pillow tops for camber adjustments
Australasian Gerbil Rearers Organisation, Official Re-Seller.
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....
- RDREDRALLIART
- Lancer Newbie
- Posts: 74
- Joined: Sat Feb 13, 2010 10:58 am
- Location: Baldivis, WA Australia
I’m certainly interested, however, I cannot commit until early September (waiting on a bonus confirmation) if the opportunity exists in September and my boss keeps me happy I’m in for 6/4
TBC 6/4
Sorry Guys, Bonus was an EPIC FAIL
TBC 6/4
Sorry Guys, Bonus was an EPIC FAIL
Last edited by CARLOS on Mon Sep 06, 2010 4:05 pm, edited 2 times in total.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I have now been quoted on a delivered price. Though since this apparently is being monitored, I cannot announce and I ask that you do not divulge it either though you can go and ask other company's what price they're doing it for. But with how competitive this is, please do not divulge our price.
The deal I've struck I think is very decent. Though the conditions are
1. That I can only deliver to 1 person per state. So if 7 people buy in NSW, one person there must recieve all 7 sets and distribute from there.
2. There must be a minimum of 10 sets ordered for the price. If more than 10 sets are ordered, the price will fall further.
For those who are on my list below, I will be PM-ing you the price.
All BR Type BC Coilovers
For 2008+ Mitsubishi Lancer CY4A
1. ofey 6/4 VIC
2. ofey's buddy 7/5 QLD
3. AJjnr86 7/5 QLD
4. bd-850 6/4 NSW
5. driftnut:(( 7/5 NSW
6. Placeholder 7/5 NSW
For Specialist:
7. peanut for a 1989 Toyota MX83 Cressida 7/5 NSW
8. 03blk for a '06 Mazda3 MPS 7/5
9. cletusb for a '07 Mazda6 MPS 7/5
10. JebusMPS for a '06 Mazda3 MPS 7/5
He has given us a 2 week window for me to collect the money. I need to pay up for all of us on 1 Sept 2010 to take up this offer.
If anymore people join us, this price will only fall further. So PM me if you're keen.
The deal I've struck I think is very decent. Though the conditions are
1. That I can only deliver to 1 person per state. So if 7 people buy in NSW, one person there must recieve all 7 sets and distribute from there.
2. There must be a minimum of 10 sets ordered for the price. If more than 10 sets are ordered, the price will fall further.
For those who are on my list below, I will be PM-ing you the price.
All BR Type BC Coilovers
For 2008+ Mitsubishi Lancer CY4A
1. ofey 6/4 VIC
2. ofey's buddy 7/5 QLD
3. AJjnr86 7/5 QLD
4. bd-850 6/4 NSW
5. driftnut:(( 7/5 NSW
6. Placeholder 7/5 NSW
For Specialist:
7. peanut for a 1989 Toyota MX83 Cressida 7/5 NSW
8. 03blk for a '06 Mazda3 MPS 7/5
9. cletusb for a '07 Mazda6 MPS 7/5
10. JebusMPS for a '06 Mazda3 MPS 7/5
He has given us a 2 week window for me to collect the money. I need to pay up for all of us on 1 Sept 2010 to take up this offer.
If anymore people join us, this price will only fall further. So PM me if you're keen.
Last edited by ofey on Fri Aug 20, 2010 5:50 pm, edited 2 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Updated list:
All BR Type BC Coilovers
For 2008+ Mitsubishi Lancer CY4A
1. ofey 6/4 VIC
2. ofey's buddy 7/5 QLD
3. AJjnr86 7/5 QLD
4. bd-850 6/4 NSW
5. driftnut:(( 7/5 NSW
6. Placeholder 7/5 NSW
For Specialist:
7. peanut for a 1989 Toyota MX83 Cressida 7/5 NSW
8. 03blk for a '06 Mazda3 MPS 7/5
9. cletusb for a '07 Mazda6 MPS 7/5
10. JebusMPS for a '06 Mazda3 MPS 7/5
All BR Type BC Coilovers
For 2008+ Mitsubishi Lancer CY4A
1. ofey 6/4 VIC
2. ofey's buddy 7/5 QLD
3. AJjnr86 7/5 QLD
4. bd-850 6/4 NSW
5. driftnut:(( 7/5 NSW
6. Placeholder 7/5 NSW
For Specialist:
7. peanut for a 1989 Toyota MX83 Cressida 7/5 NSW
8. 03blk for a '06 Mazda3 MPS 7/5
9. cletusb for a '07 Mazda6 MPS 7/5
10. JebusMPS for a '06 Mazda3 MPS 7/5
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ralliartrobbo
- Lancer Newbie
- Posts: 30
- Joined: Thu Dec 17, 2009 5:21 pm
- Location: Canberra, Austtralia
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 10 guests