***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
cyssero
Lancer ES/EX
Lancer ES/EX
Posts: 145
Joined: Sun May 31, 2009 10:36 pm
Location: NSW, Australia

Postby cyssero » Sat Jun 19, 2010 1:16 am

Hi ofey,

Would you be able to find a price for M314198P26 ? It's side-protection molding for our Lancer's, and that (P26) is for Red. May also be M314198*** .

I am sick to death of scratches on my car from inconsiderate others, and I know even after it gets resprayed it will get scratched again.. hopefully these will prevent future ones. Thanks :)

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sat Jun 19, 2010 5:15 pm

hey ofey how much is installations for the floor ilummination kits and what other colours do they come in or is it just blue

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Jun 19, 2010 8:02 pm

Mitch: From what I can see it says it requires 0.75 hr for the install. The base charge is A$82.50+GST = A$90.75 per hour.

So with the set costing A$150 now. You're looking at about A$250 to get it installed.

Not worth it IMHO.
Best to do it yourself with a A$30 pair of neons at Autobarn.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sat Jun 19, 2010 9:31 pm

ok just looking wasn't going to do it

User avatar
dannyboi
Lancer Evolution
Lancer Evolution
Posts: 818
Joined: Sat Jun 26, 2010 8:53 pm
Location: Sydney, Australia

Postby dannyboi » Sat Jun 26, 2010 9:17 pm

Hi there,

I was interested in getting weathershields and headlamp protectors for my new Activ. Just wondering how much that would cost, and also if there are more than one type of weathershield. I'd probably prefer the clip on ones instead of the stick-on if there is a choice.

Regards,

stafi
INACTIVE Member Account
Posts: 5
Joined: Mon Jun 28, 2010 3:21 pm
Location: Sydney

Postby stafi » Mon Jun 28, 2010 3:32 pm

In regards to the MMCS reverse camera, is the harness for the back of the radio unit which allows a generic camera to be installed? if not what is it used for?

smithsy
Lancer VR/GT
Lancer VR/GT
Posts: 252
Joined: Wed Jan 27, 2010 8:54 am
Location: West side

Postby smithsy » Mon Jun 28, 2010 4:06 pm

The Mitsubishi OEM weathershields have both double sided tape and metal clips to hold them on.

As for the MMCS harness it is only for the Mitsibishi OEM camera. It's possible it can be adapted to another camera but you'd have to cut leads up,etc and no one has yet tried this as far as I am aware.

stafi
INACTIVE Member Account
Posts: 5
Joined: Mon Jun 28, 2010 3:21 pm
Location: Sydney

Postby stafi » Mon Jun 28, 2010 5:21 pm

Thanks for the feedback is the camera able to be mounted on top of the numberplate and kept out of site? Sorry for all the questions it is actually a present for the missus and she is quite pedantic when it comes to her little aspire. Also do you have the iPod cable for the MMCS since I am taking the radio out its a good idea to do that also...

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jun 28, 2010 5:41 pm

stafi wrote:Thanks for the feedback is the camera able to be mounted on top of the numberplate and kept out of site? Sorry for all the questions it is actually a present for the missus and she is quite pedantic when it comes to her little aspire. Also do you have the iPod cable for the MMCS since I am taking the radio out its a good idea to do that also...


Jim yes it can. I custom fit mine and wrote a how to do it.

Here is a link with all the reverse camera info http://clubcj.net/viewtopic.php?t=2859&start=0
Last edited by aspir3 on Wed Jun 30, 2010 6:46 pm, edited 1 time in total.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Jun 28, 2010 5:44 pm

Yes both the wiring harness for the MMCS Rev Park Camera and the iPod cable are available through me. The prices were clearly stated in the first post. So please don't ask again. Registered and insured Postage will be charged at cost which would be no more than A$15.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Aspired
Lancer Ralliart
Lancer Ralliart
Posts: 682
Joined: Tue Jun 23, 2009 11:11 pm
Location: Melbourne, VIC, Australia

Postby Aspired » Tue Jun 29, 2010 2:03 pm

I have also fitted mine above the numberplate
pics in the link posted above
Last edited by Aspired on Wed Jun 30, 2010 6:54 pm, edited 1 time in total.

mikec
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Mar 03, 2009 8:21 pm
Location: Sydney, NSW, Australia

Postby mikec » Wed Jun 30, 2010 5:22 pm

i didnt see on item listing for OEM lancer mats
can you get them ofey?
how much?

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Wed Jun 30, 2010 5:28 pm

Michael I am sure Ofey will be able to find a price for you but often small items it is not worth it as once you add postage it is cheaper for you to get them from your dealer.

I always ask for trade, which saves a few dollars.

mikec
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Mar 03, 2009 8:21 pm
Location: Sydney, NSW, Australia

Postby mikec » Wed Jun 30, 2010 5:52 pm

aspir3 wrote:Michael I am sure Ofey will be able to find a price for you but often small items it is not worth it as once you add postage it is cheaper for you to get them from your dealer.

I always ask for trade, which saves a few dollars.

ive posted in the buy/trade forum area seems noone wants to give up their mats

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Wed Jun 30, 2010 5:56 pm

Here you go michael from the first page in this post

kk)
MZ360243EX AUTO mats A$75.00
MZ360244EX MANUAL mats A$72.00


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 7 guests