***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
MattyvR
Lancer ES/EX
Lancer ES/EX
Posts: 138
Joined: Wed Feb 17, 2010 6:45 am
Location: Brisbane, Australia

Postby MattyvR » Sat Apr 24, 2010 2:06 pm

Tin_Pusher wrote:I thought I posted a bunch of pix in another thread a while back. Here are a couple anyway showing the composition and thickness. They are nylon or similar with a rubber-like backing (doesn't smell like rubber though). Somewhere in the past I saw neoprene mentioned with these covers, but I can't recall where.

Image
Image


Are you happy with the quality of the covers? Just thinking of getting a set but don't want to buy them without knowing what they're like.

@ofey if no one else has them, do you know what seat covers people have / what other seat covers can be purchased through you that you would recommend. Cheers

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sat Apr 24, 2010 2:06 pm

jstev89 wrote:
ofey wrote:
jstev89 wrote:Can you get a spoiler same as on the rx lancer?


Apparently PMR says that these are the same spoiler as the VRX one:

6515A034WA AIR SPOILER-RR-WHITE (only comes in white):
RRP = A$629.00+
ClubCJ Price = A$600.00

I have a VRX clone spoiler made from ABS plastic going for A$100 + postage with suppplied foam pads and screws.


Ouch! thanks for that champ


Ofey, the RX spoiler is the same as the one Tadz has. It is not as tall as the VRX and it has one indent that runs the length of the spoiler unlike the 2 indents that the VRX spoiler has.

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Apr 24, 2010 5:47 pm

^^ What Shane said re RX Spoiler

Activ spoiler is unique and not listed in the parts catalogue last I was told.

User avatar
Tin_Pusher
Lancer ES/EX
Lancer ES/EX
Posts: 186
Joined: Wed Sep 23, 2009 8:14 pm
Location: Woodend, Victoria

Postby Tin_Pusher » Sun Apr 25, 2010 11:48 am

Are you happy with the quality of the covers?
Yeah, I'm happy with them. They've been on 7 months now and still look like the day I picked up the car, but then I'm not one to knock the interior (or exterior) around.

And I found the reference to neoprene - the Outlander accessories brochure refers to them as "neoprene seat covers".

User avatar
mr_evo
Alumni
Alumni
Posts: 761
Joined: Sun Mar 21, 2010 12:39 pm
Location: Gold Coast
Contact:

Postby mr_evo » Wed Apr 28, 2010 5:13 pm

can you get the Boost Scuff Guard and the net thing for the boot?
:D I'm back baby! :D
Enkei - HKS - Turbosmart - Cosworth- TMW - Defi - DeatschWerks

abundoc
Lancer Learner
Lancer Learner
Posts: 10
Joined: Sat Apr 10, 2010 7:38 pm
Location: sydney,australia

Postby abundoc » Wed Apr 28, 2010 9:38 pm

ofey..you haven't got back to me about the chrome door belt mould, im planning on getting a set for my ES..more info on buying pls

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Apr 28, 2010 10:12 pm

abundoc wrote:ofey..you haven't got back to me about the chrome door belt mould, im planning on getting a set for my ES..more info on buying pls


I don't mean to be rude but:
1. The thread moves so I may have missed your post
2. You don't have 20 posts so it's unlikely that you PM-ed me.
3. The prices are stated clearly in the first post of this thread:

LEFT/h/FRONT 5727a105
RIGHT/h/FRONT 5727a106
Price: A$90.00 each

LEFT/h/rear 5757a089
RIGHT/h/rear 5757a090
Price: A$85.00 each

Parts Total is A$350

Postage shouldn't be more than A$20 by Aus Post Registered and Insured.

What else would you like to know?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
mr_evo
Alumni
Alumni
Posts: 761
Joined: Sun Mar 21, 2010 12:39 pm
Location: Gold Coast
Contact:

Postby mr_evo » Thu Apr 29, 2010 12:04 pm

Ofey you got PM mate :)
:D I'm back baby! :D
Enkei - HKS - Turbosmart - Cosworth- TMW - Defi - DeatschWerks

abundoc
Lancer Learner
Lancer Learner
Posts: 10
Joined: Sat Apr 10, 2010 7:38 pm
Location: sydney,australia

Postby abundoc » Thu Apr 29, 2010 6:49 pm

thanks ofey for ur reply, is the mould DIY installation?..i really wanna those
pretty soon

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 29, 2010 6:52 pm

Yes they are. Apparently LZY EYE swapped some of his stock ones for chrome ones. Ask him about the process.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

abundoc
Lancer Learner
Lancer Learner
Posts: 10
Joined: Sat Apr 10, 2010 7:38 pm
Location: sydney,australia

Postby abundoc » Thu Apr 29, 2010 7:01 pm

can't pm yet, im still new here :)

User avatar
Zereul
Lancer Learner
Lancer Learner
Posts: 19
Joined: Thu Apr 15, 2010 10:21 pm
Location: Sydney, Australia

Postby Zereul » Thu Apr 29, 2010 7:23 pm

ofey, can you get the HID headlight assembly?

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Thu Apr 29, 2010 7:31 pm

$$s

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 29, 2010 8:07 pm

Following up to a question:

jstev89 wrote:Can you get a spoiler same as on the rx lancer?


And someone said it wasn't the VRX spoiler. This is correct.

The spoiler is called a Premium Spoiler and they come pre-painted. Though not worth buying through me (unless you're in Melbourne):

MR936528 SPOILER KIT-PREMIUM(L'NG BLUE)
RRP = A$281+
CCJ Price = A$270

Still waiting on the rest of the parts.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Thu Apr 29, 2010 8:52 pm

abundoc wrote:thanks ofey for ur reply, is the mould DIY installation?..i really wanna those
pretty soon


Yep very simple have done this myself 5 min job. On the inside of your doors you will find a single screw that holds the trim on remove this, then simply pull the trims up gently slowing pulling them towards yourself.


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 18 guests