***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

3M Di-Noc Carbon Roof + Parts (More Photos)

Everything Lancer Related + News & Current Affairs.

Moderators: Moderators, Senior Moderators

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

3M Di-Noc Carbon Roof + Parts (More Photos)

Postby draevon » Fri Apr 16, 2010 4:12 pm

So I spent all morning doing my carbon vinyl roof. Certainly not a job I ever want to do again, but pretty happy with the results. Also redid my interior, after originally doing it in Neffywrap. 3M Di-Noc is awesome stuff to work with though, and after using both, I'd definitely recommend it over Neffywrap if you can afford it. More details later ... I'm running late:

Image

Image

Image

Image

More photos added:

Image

Image

Image

Image
Last edited by draevon on Mon Apr 19, 2010 5:28 pm, edited 1 time in total.
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
Alex.K
Lancer ES/EX
Lancer ES/EX
Posts: 179
Joined: Mon Apr 05, 2010 7:17 pm
Location: Melbourne, Australia

Postby Alex.K » Fri Apr 16, 2010 5:11 pm

WOW. Great work mate. You must be a perfectionist. ;)

even the steering wheel control panels. I wanna do that too

when you get back, please tell me how neffy wrap and di noc are different.

And how much they cost thanks :)
Lancer -> Accord Euro -> M3

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Fri Apr 16, 2010 5:49 pm

can we have some close ups of the roof??

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Fri Apr 16, 2010 7:13 pm

Alex.K wrote:WOW. Great work mate. You must be a perfectionist. ;)

even the steering wheel control panels. I wanna do that too

when you get back, please tell me how neffy wrap and di noc are different.

And how much they cost thanks :)


neffywrap cloth material no sticky side Requires glue. cheaper.

Dinoc Carbon Vinyl a vinyl sticky side made my 3M Expensive.

1Sq Yard of NeffyWrap about $50

1Sq Yard of 3M Di Noc, >$100
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Apr 16, 2010 9:55 pm

looks very nice! how did you get it into the curves so well?
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Apr 16, 2010 10:04 pm

We need bigger pics captain!!

Looks great draveon, you did a wicked job on the interior trims
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Fri Apr 16, 2010 10:06 pm

I'm very interested in doing this for my roof but was wondering what you thought of the process and how well it's staying on so far... also need to figure out how much 3m stuff I need to buy.
Image

"A man who stands for nothing, falls for anything."

User avatar
86MIM
Lancer Evolution
Lancer Evolution
Posts: 933
Joined: Mon Nov 23, 2009 3:28 pm
Location: Brisbane, Australia

Postby 86MIM » Sun Apr 18, 2010 1:55 pm

That looks awesome Tim!

Look forward to the roof close-ups :D
kii

tykkään kiiltävä, nopeasti ja se on saanut olla ähkyä.
_________________
ClubCJ Lifetime Member #86

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Sun Apr 18, 2010 8:52 pm

Thanks guys ... I'll answer a few questions:

The CJ roof is pretty much smack on 4x5 feet. Di-Noc rolls are manufactured 122cm (just over 4 feet) wide. You need a little more length to allow for some overhang. I used 160cm length for the roof and wouldn't want to use much less. I used the remaining 80cm I bought to do the interior. I wanted to do the rear armrests as well but didn't have enough vinyl left over so will buy a little more later on.

As far as the difference between Di-Noc and Neffy ... As Blake said, Neffy is a fabric and needs to be used with contact adhesive. Neffy wrap is pretty stretchy, but must be held in place while the glue dries which can be annoying and time consuming. Di-Noc is self adhesive. It's stiffer to start with, but when it's heated if goes ultra soft and can be stretched to a huge extent. Heating also makes it ultra sticky, and basically if you can stretch it and get it to stick initially, within about 4 seconds it'll be set there. It cools even stiffer then it starts and really locks in place (it can be heated and goes soft over and over again). Di-Noc feels a lot more durable, both in it's ability to stick more permanently, and it just seems like a more solid product.

I wouldn't try to Neffywrap the steering switches, because I don't think it would stick nearly as well, it's thicker so would interfere with the bottons, and also because i think it would wear poorly with me constantly rubbing my thumbs on it.

Cost-wise Di-Noc is definately more expensive, but I did my roof and majority of my interior for $230 ... that's still pretty affordable for a high quality product.

With regard to doing the roof, it took about 4 hours start to finish. I only used heat for the last 1/3 of the roof, and if I was doing it again, I'd probably avoid using heat, because by making it more stretchy, I can now see tiny waves in the carbon pattern. Not huge but enough for me to notice. The edges were a bit trial and error. I decided not to take the weather strips off after breaking the first clip I tried, but I think it looks fine the way it's done. Seems to be on nice and solid and looks pretty permanent.

Will take some more pics of the roof and the edges tomorrow ... let me know if I've missed any questions.
.

Image

GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
Hecky
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 474
Joined: Sun Dec 06, 2009 4:22 am
Location: Sydney, Australia

Postby Hecky » Sun Apr 18, 2010 9:11 pm

Very nice....great work!
HKS/AMS/GFB/MRT/K&N/DBA
Whiteline/Ultra-Racing/Rexpeed/Autometer/Yokohama Racing/Cusco
...and some other stuff which the fun police don't approve of... :)

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Mon Apr 19, 2010 5:28 pm

Closeup photos added to first post.
.

Image

GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Mon Apr 19, 2010 5:34 pm

looks HOT, how did you do around the aerial?

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Mon Apr 19, 2010 5:35 pm

I took the aerial off, laid the vinyl, then refitted the aerial :)
.

Image

GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Mon Apr 19, 2010 5:39 pm

ahh cool

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Apr 19, 2010 5:49 pm

Looks great.

Good job. Looks very professional.

It will be interesting how it is with the sun on it. It may help keep the cabin cooler?


Return to “ClubCJ Talk”

Who is online

Users browsing this forum: No registered users and 85 guests