***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Melbourne Newbie
Moderators: Moderators, Senior Moderators
Hi Sarah.
Here are a list of parts that may help you in your MOD journey to get your car to look like that concept sportsback
-Ralliart bonet
-Chrome moulding for front end(Quite a few guys have this on thier car. I think autobarn sells it at a reasonable price)
-Balcked out centre bumper vinyl overlay
-EVO X front fender arches
-Lower lip (Check Ofey's car)
Just to name a few
P.S. Enjoy the get togethers. It's great to see a bunch of Lancer owners with thier own personal touch to thier car. All good and well seeing them on screen but it's heaps better to see it first hand.
Here are a list of parts that may help you in your MOD journey to get your car to look like that concept sportsback
-Ralliart bonet
-Chrome moulding for front end(Quite a few guys have this on thier car. I think autobarn sells it at a reasonable price)
-Balcked out centre bumper vinyl overlay
-EVO X front fender arches
-Lower lip (Check Ofey's car)
Just to name a few
P.S. Enjoy the get togethers. It's great to see a bunch of Lancer owners with thier own personal touch to thier car. All good and well seeing them on screen but it's heaps better to see it first hand.
Official ClubCJ Sponsor.
- PlatinumSarah
- INACTIVE Member Account
- Posts: 38
- Joined: Thu Apr 08, 2010 5:42 am
- Location: Melbourne, Australia
Thank you for the tips. As I mentioned before I don't have a clue about any of this stuff so any advice I can get is wonderful!
how do you go about changing the doors and stuff like that? Do you get someone to build them from scratch? see below
how do you go about changing the doors and stuff like that? Do you get someone to build them from scratch? see below
Last edited by PlatinumSarah on Sat Apr 10, 2010 11:25 pm, edited 1 time in total.
2009 Lancer VR Platinum Sportback
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Changing Doors are a little far fetched I suspect ... . Not impossible but imagine having to remould a new door. I know Seibon sells replacement CF doors for racing. They're no different from the stock door but made of CF for the lightening and they're prohibitively expensive!
Not many mods to change a door. Look at all the attachments to your car that are made of plastic Not the metal bits, most of the time those are the ones easily available i.e. front bumper bar, rear bumper bar, side skirts and spoilers.
Not many mods to change a door. Look at all the attachments to your car that are made of plastic Not the metal bits, most of the time those are the ones easily available i.e. front bumper bar, rear bumper bar, side skirts and spoilers.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- PlatinumSarah
- INACTIVE Member Account
- Posts: 38
- Joined: Thu Apr 08, 2010 5:42 am
- Location: Melbourne, Australia
I can't make it tomorrow unfortunately but I will definitely come to the next one.
The concept almost looks like it has a panoramic roof doesn't it? Wow that'd be nice. I wonder hmmm
hahaha you guys were saying I'd get suckered in and start going nuts. I originally was just going to change the chrome grille now I'm entertaining the idea of new doors and roof? madness
The concept almost looks like it has a panoramic roof doesn't it? Wow that'd be nice. I wonder hmmm
hahaha you guys were saying I'd get suckered in and start going nuts. I originally was just going to change the chrome grille now I'm entertaining the idea of new doors and roof? madness
Last edited by PlatinumSarah on Sat Apr 10, 2010 11:40 pm, edited 1 time in total.
2009 Lancer VR Platinum Sportback
Yeah something i've seen and liked are the dual exhausts and matching bumper on sportbacks. Can't remember who had them, or if its a ralliart thing as well.
Don't understand buying your car and trying to make it look like another. That'll just cost more than its worth. Better to make upgrades than changes.
Or to buy a better car with the ridiculous money it would cost to reshape yours.
Don't understand buying your car and trying to make it look like another. That'll just cost more than its worth. Better to make upgrades than changes.
Or to buy a better car with the ridiculous money it would cost to reshape yours.
- PlatinumSarah
- INACTIVE Member Account
- Posts: 38
- Joined: Thu Apr 08, 2010 5:42 am
- Location: Melbourne, Australia
realistically it's not gonna happen- you're right, too expensive.
And I agree that if you want your car to look like another, then why not buy the other in the first place. And if the concept was available to buy then that is what I would be driving now but it's not so I'm not.
But I don't see anything wrong with adding some bits and pieces to improve the look of your car. Such as the chrome grille surround, which looks much better than the standard. And the factory alloys are nasty on the 09 platinum, so they HAVE to go. I do like the Mitsu ones on the concept but the 10 spoke ones look good too
And I agree that if you want your car to look like another, then why not buy the other in the first place. And if the concept was available to buy then that is what I would be driving now but it's not so I'm not.
But I don't see anything wrong with adding some bits and pieces to improve the look of your car. Such as the chrome grille surround, which looks much better than the standard. And the factory alloys are nasty on the 09 platinum, so they HAVE to go. I do like the Mitsu ones on the concept but the 10 spoke ones look good too
Last edited by PlatinumSarah on Sun Apr 11, 2010 12:04 am, edited 1 time in total.
2009 Lancer VR Platinum Sportback
Not sure why you would want to change the doors. Is it just the sharper look on the contour lines that you like.
With all the stuffing around making new doors a different path to go down is to take you car to a reputable panel shop and get them to sharpen the lines and respray the doors. No need for engineering but your insurance company may not warant the Mod.
I think the lines that are on there are fine.
Just get some fender arches (Commonly black plastic mouldings that go on the front guards behind the wheels)
With all the stuffing around making new doors a different path to go down is to take you car to a reputable panel shop and get them to sharpen the lines and respray the doors. No need for engineering but your insurance company may not warant the Mod.
I think the lines that are on there are fine.
Just get some fender arches (Commonly black plastic mouldings that go on the front guards behind the wheels)
Official ClubCJ Sponsor.
- bunnishiwa
- Lancer Legend
- Posts: 1284
- Joined: Thu Dec 24, 2009 4:22 pm
- Location: Rye, Melbourne
Hi to you Sarah - this is a good site that you've joined.
Does anyone know what make those wheels are on that concept Lancer? Look pretty sick
Does anyone know what make those wheels are on that concept Lancer? Look pretty sick
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- GS 3 port controlled wooooot
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar
Noli Timere Messorem
- PlatinumSarah
- INACTIVE Member Account
- Posts: 38
- Joined: Thu Apr 08, 2010 5:42 am
- Location: Melbourne, Australia
lukeaday wrote:Not sure why you would want to change the doors. Is it just the sharper look on the contour lines that you like.
With all the stuffing around making new doors a different path to go down is to take you car to a reputable panel shop and get them to sharpen the lines and respray the doors. No need for engineering but your insurance company may not warant the Mod.
I think the lines that are on there are fine.
Just get some fender arches (Commonly black plastic mouldings that go on the front guards behind the wheels)
Didn't think that was an option, thought you'd have to replace the whole side. See why I need you guys?
Realistically though even that would be too expensive probably but I can dream
2009 Lancer VR Platinum Sportback
- PlatinumSarah
- INACTIVE Member Account
- Posts: 38
- Joined: Thu Apr 08, 2010 5:42 am
- Location: Melbourne, Australia
Dingers wrote:Bah, I'm so not a fan of that concept.
CJ's drip with good looks, but that ultra-futuristic look doesn't do it for me.
Also, the concept lancer looks like an Alfa Romeo.
never considered that but the Brera was my favourite euro car for awhile and I seriously considered buying one til everyone told me they keep breaking down. It's the back I love - it's just beautiful
2009 Lancer VR Platinum Sportback
Who is online
Users browsing this forum: No registered users and 212 guests