***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Ralliart front bumper

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
bye2u
Lancer Legend
Lancer Legend
Posts: 1365
Joined: Wed Jan 28, 2009 3:55 am
Location: Sydney, NSW, Australia

Postby bye2u » Sat Mar 20, 2010 3:58 pm

maybe double what you just mentioned or more..

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Mar 20, 2010 3:58 pm

It's more like $800-$1000

You will need the following:

- Front bar Cover
- Upper and Lower Centre Grilles
- Fog Lamp Grilles
- Chrome Garnish

User avatar
Superintendent Chalmers
Lancer Legend
Lancer Legend
Posts: 1003
Joined: Wed Apr 01, 2009 10:33 am
Location: Townsville, QLD, Australia

Postby Superintendent Chalmers » Sat Mar 20, 2010 4:37 pm

This is a dealer we are talking about. Practically it would be about $800, so that means it will cost you around $1500 from them. I would actually consider changing my whole front for a VRX (black preferably), but would have a hard time selling the car for a decent price later. Keep us up to date with how much they quote.

User avatar
ash06
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 396
Joined: Sun Dec 28, 2008 3:47 pm
Location: Sydney, NSW, Australia

Postby ash06 » Sat Mar 20, 2010 4:41 pm

Anyone aware if the Ralliart Rear bumper fits onto a ES/VR/VRX lancer?
Had someone scratch my rear bumper up in a parking lot. & hoping i can get it replaced with one of these. Is that even possible?

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Mar 20, 2010 4:43 pm

Yes it fits fine. A few have had it done, most recently is ofey.

User avatar
bye2u
Lancer Legend
Lancer Legend
Posts: 1365
Joined: Wed Jan 28, 2009 3:55 am
Location: Sydney, NSW, Australia

Postby bye2u » Sat Mar 20, 2010 4:43 pm

the RA bumper will fit :) but i think you need to modify your exhaust since the RA exhaust outlet sits further in than the es/vr/vrx exhaust..

User avatar
Superintendent Chalmers
Lancer Legend
Lancer Legend
Posts: 1003
Joined: Wed Apr 01, 2009 10:33 am
Location: Townsville, QLD, Australia

Postby Superintendent Chalmers » Sat Mar 20, 2010 4:46 pm

SIR-VRX wrote:Yes it fits fine. A few have had it done, most recently is ofey.


Cool, is there any photos of it??? I only look at the threads I care about, so don't always see off topic things in other threads.

Thought you meant grille, not bumper. Didn't read properly.
Last edited by Superintendent Chalmers on Sat Mar 20, 2010 4:50 pm, edited 1 time in total.

User avatar
ash06
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 396
Joined: Sun Dec 28, 2008 3:47 pm
Location: Sydney, NSW, Australia

Postby ash06 » Sat Mar 20, 2010 4:49 pm

sounds good then,
ofey post some pics up asap plz!

on a further note* am i able to have my bumper replaced with a Ralliart rear? the left of mine is scratched up now, i'd hate if they just resrayed it, is there anyway i can get this bumper through insurance?

User avatar
Superintendent Chalmers
Lancer Legend
Lancer Legend
Posts: 1003
Joined: Wed Apr 01, 2009 10:33 am
Location: Townsville, QLD, Australia

Postby Superintendent Chalmers » Sat Mar 20, 2010 4:51 pm

ash06 wrote:sounds good then,
ofey post some pics up asap plz!

on a further note* am i able to have my bumper replaced with a Ralliart rear? the left of mine is scratched up now, i'd hate if they just resrayed it, is there anyway i can get this bumper through insurance?


Don't know, none of us are your insurer! :)

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Mar 20, 2010 4:53 pm

He has kept it pretty quiet, so the only pic is in this: Linky

He also got the OEM RA rear muffler fitted up, but it had to be modified to not only meet up with the stock exhaust but had to be made lower too, as the boot floor of the RA is higher to fir this muffler.

User avatar
ash06
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 396
Joined: Sun Dec 28, 2008 3:47 pm
Location: Sydney, NSW, Australia

Postby ash06 » Sat Mar 20, 2010 5:19 pm

Superintendent Chalmers wrote:
ash06 wrote:sounds good then,
ofey post some pics up asap plz!

on a further note* am i able to have my bumper replaced with a Ralliart rear? the left of mine is scratched up now, i'd hate if they just resrayed it, is there anyway i can get this bumper through insurance?


Don't know, none of us are your insurer! :)


haha, and oh how i wish someone on this club were.
All the free parts i would get! :D

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Sat Mar 20, 2010 5:35 pm

Heres a picture of ofey's car with the RA rear bumper. He also got an OEM RA Exhaust aswell....

Image
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Mar 20, 2010 5:43 pm

Doing a Blakey Tadz... Posting without reading the other posts in the thread ;)

I've already linked a picture and explained it :P

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Mar 20, 2010 6:16 pm

I can solve this for you boys easy. My exhaust guy cracked my front center lip which I have still yet to replace due to time constraints so I asked PMR to do a quote for the RA front. I was quoted by PMR about A$1,500.00 for the parts necessary. The fog lamp part is A$400 so I'd say you'd be looking at about A$1,200.00.

You could also remove the radiator cover i.e. that plastic thing that has the air flow guide, that knocks off a further A$100 odd?

RRP is about A$2,000.00.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Superintendent Chalmers
Lancer Legend
Lancer Legend
Posts: 1003
Joined: Wed Apr 01, 2009 10:33 am
Location: Townsville, QLD, Australia

Postby Superintendent Chalmers » Sat Mar 20, 2010 6:24 pm

ofey wrote:I can solve this for you boys easy. My exhaust guy cracked my front center lip which I have still yet to replace due to time constraints so I asked PMR to do a quote for the RA front. I was quoted by PMR about A$1,500.00 for the parts necessary. The fog lamp part is A$400 so I'd say you'd be looking at about A$1,200.00.

You could also remove the radiator cover i.e. that plastic thing that has the air flow guide, that knocks off a further A$100 odd?

RRP is about A$2,000.00.


Did that include any kind of trade in for your old one, or would you be able to sell that to someone else privately???

Also, can you just buy the PMR side skirts (the ones on the PMR pimped out ES cars) on their own or do you need to buy the whole PMR set of bodykit??


Return to “Exterior”

Who is online

Users browsing this forum: Bing [Bot] and 13 guests