***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

[WA] Chat Thread

Local WA State News, Meets, Cruises, Information & Talk.

Moderators: Moderators, Senior Moderators

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Thu Mar 11, 2010 6:20 pm

They're very bright, they look brighter than they acctually are though.

Being LED they're not bright at a distance per se, but noticable

I think only one or two easterners have them installed but I'm not too sure :P
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
BrownDog
Lancer Ralliart
Lancer Ralliart
Posts: 716
Joined: Wed Feb 10, 2010 7:31 pm
Location: Perth, WA

Postby BrownDog » Thu Mar 11, 2010 8:34 pm

Just had a brain wave with the K&N CAI....

I haven't tried it or measured anything but he it goes

1. Remove stock air intake
2. Move Battery to where the Air Filter Box is (may have to make a bracket for it)
3. Put CAI where the battery use to be. and hook intake to front left wheel

of course there are other steps to do this. wiring battery up. i don't wanna try this till after 15000km service so if anyone else wants to try.

looking at it today it should fit plus the piping into the K&N wont get damage since there is no U bend.....

Just a thought and would like to see this happen.

If you see any problems with this just comment..
MODS DONE
Sound System
Exhaust
Tint
Rear Sway Bar

MODS TO DO
Wheels
Lips/ Bodykit
Install in-car LEDs

Mez
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 317
Joined: Sat Oct 03, 2009 12:13 am
Location: Perth

Postby Mez » Fri Mar 12, 2010 3:09 am

What I really want to do is this
http://www.knfilters.com/images/m/69-6546TWR_Eng1.jpg
NOTE: this is an Evo X (has other pipeing for intercooler n stuff) so I can't do it like this but, if I could get a ralliart snorkel like that, heat shield conetcting right up to the front of the snorkel then, filter on pipe straight to the engine, it would be perfect.
It could be done if you could custom do the pipe work with a few bits from that kit, parts from that kit you would need = short RalliArt snorkel, heat shield and filter.

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Mar 12, 2010 10:48 am

That looks pretty good Adrian, I'd probably also get some extra piping for air from the wheel arch too, it probably wouldn't do too much extra though
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Fri Mar 12, 2010 4:49 pm

Left a note on a silver lancer with mods like auto-folding mirrors, vortex generator and a mitsu sticker on the front windshield.
Was a P plater too.

Won't say where cos idk if they care or not, but is it anyone here? :D

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Mar 12, 2010 4:53 pm

Hmmm I think I'm the only (active) WA member with a silver lancer WITH a vortex generator.

Not 100% sure about that though, but nice work on spotting them :D
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Fri Mar 12, 2010 5:08 pm

Thought it was your car actually Graham, before i came online and looked at yours.
I just said 'ClubCJ? Dire_VR09' cos i was assuming they are from here but now im thinking they aren't. :P
Hell sus leaving a note on someones car too.
Oh well they'll figure it out.
I have also seen a black aspire with a vortex generator in the same carpark before but that was slightly before i got my lancer, and haven't seen it since.

1500km service coming up! :roll:
They're more like an inspection right? Better undo the free SRI mod seeing as thats easy.
Gotta keep the fat cats happy!

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Mar 12, 2010 5:23 pm

Ohh :P I've never seen a VG on a CJ in WA yet, I've seen a few on older model Lancers though

I'm sure if they're a smart cookie they'll google ClubCJ and find us :D

Yeah as far as I'm aware it's a checkup, it's the best time to tell them of any problems/issues you have with the car too and get them fixed :)

I'll probably take my strut bar off for my 30k service next week as you can't get the stock air filter out with it on lol
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Fri Mar 12, 2010 5:34 pm

Ok, sounds boring. They said it'll only take an hour if i get there on time.

No complaints from me, unless they feel like fixing the rattling in ALL my doors. :roll:
And the scratches the stereo screen had when i got it :x
But thats more my fault cos its not like i didn't see the car before i bought it.

I'll let it slide :P

User avatar
BrownDog
Lancer Ralliart
Lancer Ralliart
Posts: 716
Joined: Wed Feb 10, 2010 7:31 pm
Location: Perth, WA

Postby BrownDog » Fri Mar 12, 2010 5:36 pm

How difficult is it to get the strut bar on and off Graham????
MODS DONE

Sound System

Exhaust

Tint

Rear Sway Bar



MODS TO DO

Wheels

Lips/ Bodykit

Install in-car LEDs

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Fri Mar 12, 2010 5:45 pm

I got rattles in my doors fixed under warranty, it was a loose bolt - I'd mention it to them, it should be a 5 min job each door :P

Strut bar would only take 5 mins off and 5 mins on :)
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Leez
Lancer MASTER
Lancer MASTER
Posts: 2061
Joined: Tue Oct 27, 2009 9:54 pm
Location: Melbourne, VIC

Postby Leez » Fri Mar 12, 2010 6:09 pm

Jake, they told me 1 hour as well, and it took 2 -.-" not a huge difference and im not complaining, but it was really boring just waiting there lol

User avatar
BrownDog
Lancer Ralliart
Lancer Ralliart
Posts: 716
Joined: Wed Feb 10, 2010 7:31 pm
Location: Perth, WA

Postby BrownDog » Fri Mar 12, 2010 6:13 pm

I dont think its boring......

I cant talk but i went for a walk

thinking back on it i should have taken the EVO X for a test drive

hat would pass the time quickly :D :D :D
MODS DONE

Sound System

Exhaust

Tint

Rear Sway Bar



MODS TO DO

Wheels

Lips/ Bodykit

Install in-car LEDs

User avatar
Leez
Lancer MASTER
Lancer MASTER
Posts: 2061
Joined: Tue Oct 27, 2009 9:54 pm
Location: Melbourne, VIC

Postby Leez » Fri Mar 12, 2010 6:35 pm

No way, you would round the block in like 30 seconds, and you would be back at the dealership already :P

User avatar
BrownDog
Lancer Ralliart
Lancer Ralliart
Posts: 716
Joined: Wed Feb 10, 2010 7:31 pm
Location: Perth, WA

Postby BrownDog » Fri Mar 12, 2010 6:37 pm

true
could also just sit there and day dream bout owning one!!!!!
MODS DONE

Sound System

Exhaust

Tint

Rear Sway Bar



MODS TO DO

Wheels

Lips/ Bodykit

Install in-car LEDs


Return to “Western Australia”

Who is online

Users browsing this forum: No registered users and 9 guests