Page 1 of 1
Posted: Mon Dec 30, 2013 12:15 pm
by Strez
Any info on where you got these from? and also what needs to be done to fit them to the RA as I'd like to upgrade my brakes soon, but unsure whether to go this route or go with the bolt on kit from MRT.
Posted: Wed Jul 23, 2014 1:41 pm
by denzza
Heard theres a bit to do to fit Brembos :/ BUT POSSIBLE!
Posted: Wed Jul 23, 2014 1:41 pm
by denzza
Heard theres a bit to do to fit Brembos :/ BUT POSSIBLE!
Posted: Wed Jul 23, 2014 4:10 pm
by ecl27
Heard you need the hubs as well so the calipers just bolt on to them. No drilling or grinding needed but I have not seen pics or actual proof of this.
Posted: Wed Jul 23, 2014 4:23 pm
by black_ice
Poe_sniper has done it without the hubs but needs a little work to fit.
Josh didnt you end up getting the BBK from America with the 6pot brembo calipers?
Posted: Thu Jul 24, 2014 5:00 am
by quachj
here's a link to some photos and talk about installing evo x brembos on an RA
http://forums.evolutionm.net/09-ralliar ... art-8.html
as u can see in the photo there is a a huge gap between where the brembo bolts on and the RA's Hub
Posted: Thu Jul 24, 2014 8:20 am
by poe_sniper
I've fitted Evo X Brembos on the rear (requires about 2.5mm of milling) and I've fitted Evo 6,7,8,9 Brembos to the front coupled with an Evo X Rotor. I did this with a 'dogbone bracket'. I didn't get the Evo X ones as the 'arms' are much longer than the previous evo brembos and would come into contact with the hub.