Page 1 of 2

FS: NSW - Ninja NJ02 Wheels x4

Posted: Tue Jan 17, 2012 11:41 am
by LZY_EYE
Item: Ninja NJ02 17x7 +42 Wheels

Location:Campbelltown / Lane Cove / Central Coast

Item Condition:Used. I have gave them a sand and paint as they had stone chips etc. If you wanted you could sand right back and respray if desired, or use as is. Some minor gutter rash has been repaired previously. Wheels are structurally sound. They were originally Bronze.

Reason for selling:No longer have the Lancer. Was sold with the track rims.

Price and price conditions:[s]$400[/s] $300

Postage Details: Pickup preferred or can organise a meetup.

Extra Info: I might have a set of wheel nuts laying around to suit. If I find them, I will include. There are 2 hubcentric rings, will need to source 2 through a tyre shop or Ebay. Can assist if required. Good for someone who has a Lancer with 16" wheels, or someone with a VRX that wants track wheels to allow cheaper tyres.

Pictures:
Image
Image
Image
Image
Image

Posted: Tue Jan 17, 2012 11:50 am
by INVUR-1
Dammit Shane Why not 18"!!! me like :(

Posted: Tue Jan 17, 2012 11:56 am
by LZY_EYE
To be honest I had to tell people they were 17" most people didn't realise. Also it tend to be cheaper to buy good quality tyres in the size to suit 17" wheels.

Because the spokes go right to the edge, and don't have the big lip and are black, they look bigger than they are :)

Posted: Tue Jan 17, 2012 11:57 am
by Chubb
Andrew Being Black they would still give an 18inch like appearance as the tyre and wheel will blend, the difference is only 12mm each side of the rim.

Here are the pics of them on Shane's old lancer http://clubcj.net/garage.php?mode=view_vehicle&CID=163

This is a pic of them on Shane's car before they were repainted http://clubcj.net/garage.php?mode=view_ ... ge_id=2546

Posted: Tue Jan 17, 2012 1:18 pm
by INVUR-1
yeah if the car is lowered it'll help to give the appearance

I will think about it ;)

Posted: Fri Jan 20, 2012 2:43 pm
by LZY_EYE
No worries :)

The price is negotiable... I need the money for a holiday ASAP!! :P

Posted: Fri Jan 20, 2012 10:46 pm
by Chubb
Just to add something could be arranged about me transporting these to Brissy should a buyer north be interested. This would have need to be discussed and worked out.

Posted: Fri Jan 20, 2012 10:50 pm
by LZY_EYE
$300... want them gone!!

Better on someone's car rather than taking up space in my garage :P

Posted: Fri Jan 20, 2012 10:56 pm
by INVUR-1
$300 O_O !!! You killing me ~~

So tempting.....=/

Posted: Sat Jan 21, 2012 7:23 am
by shamoo
These r the rims I want! I seem em on ur car n thought they looked pretty sweet! Postage would be a killer though:(

Posted: Sat Jan 21, 2012 7:28 am
by LZY_EYE
What's your post code Shannon? PM me and I can calculate it... You might be surprised :D

Posted: Sat Jan 21, 2012 8:04 am
by SAM-24A
Hey Shane ..... I think Shannon might be hinting a reason for you to drive to Adelaide ...... :P


Sam ... :lol:

Posted: Sat Jan 21, 2012 1:55 pm
by LZY_EYE
LOL Sam...

I have found the wheel nuts for the wheels. As can be seen in the pic (sorry no username :P ) There are 4 locknuts, and 16 hex nuts. Both come with the keys. :D

Image

Posted: Sat Jan 21, 2012 5:59 pm
by Zaki
how much to post to 3173 melbourne pm me if possible mate

Posted: Sun Jan 22, 2012 2:41 pm
by japez
200 and you got yourself a deal + i'll pick it up from cambelltown.

Also, would this fit a 2008 Lancer VR?