Rotational squeaking noise coming from front left wheel

[Tywhiteguy]

Ok, it was while they were off but everyone I’ve asked about it says that’s not normal. Is there nothing holding it to the hub?

[lancerdarryl]

It’s normal. The wheel holds them in place

[bumblebee]

Your rotor is a "full floating" design
Fairly common type setup
If you Goto remove it , and after the caliper is remived and the wheel removed and I'd you can't get the rotor to budge , there is two small threaded holes in the rotor near the centre
Put a bolt into it and tighten it up and if the bolt is long enough to push thru to the hub behind it, the rotor will pop off