***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
I NEED URGENT HELP
Moderators: Moderators, Senior Moderators
I NEED URGENT HELP
MY HEADLIGHT HAS CARKED IT, I NEED SOMEBODY TO TELL ME HOW TO REMOVE MY FRONT BUMPER SO I CAN GET TO THE LIGHT, PLEASE HELP
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Sorry no pics but it's so easy.
Under each wheel arch where the bumper bar joins to the body, you will find a screw. You will need a ratchet to get these screws out.
Also pop two plastic rivets to get the wheel well cover connected to the bumper bar out.
Now you have to yank the connecting piece towards you to dislodge it from its clips.
Now you've dislodge both sides.
Inside your engine bay, remove the radiator cover, you will find 5 screws there as well. You will need a ratchet to get those 5 screws out.
Then under the car you will find a host of plastic rivets and screws.
At this point you should be able to pull the whole bumper bar towards you.
Done this so many times, it's not hard anymore.
Under each wheel arch where the bumper bar joins to the body, you will find a screw. You will need a ratchet to get these screws out.
Also pop two plastic rivets to get the wheel well cover connected to the bumper bar out.
Now you have to yank the connecting piece towards you to dislodge it from its clips.
Now you've dislodge both sides.
Inside your engine bay, remove the radiator cover, you will find 5 screws there as well. You will need a ratchet to get those 5 screws out.
Then under the car you will find a host of plastic rivets and screws.
At this point you should be able to pull the whole bumper bar towards you.
Done this so many times, it's not hard anymore.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Hi Brendon
Use this site on youtube
Its easy
http://www.youtube.com/watch?v=SjIwA5YLKg0
hope this helps
Use this site on youtube
Its easy
http://www.youtube.com/watch?v=SjIwA5YLKg0
hope this helps
".FizyMo."
could do that, thanks for the suggestion, but i rang concord customs today and got quoted angel eyes and wiring up of my led strips and all up its $500, so i have $300 from my bday, so i only have to save up $200. and ive got until my strips arrive
but honestly thank you everybody, thats why i love club cj cause everyone is willing to help out
but honestly thank you everybody, thats why i love club cj cause everyone is willing to help out
FizyMo wrote:Hi Brendon
Use this site on youtube
Its easy
http://www.youtube.com/watch?v=SjIwA5YLKg0
hope this helps
awesome vid, ill be keeping this vid in handy for the future +1
Who is online
Users browsing this forum: No registered users and 66 guests