***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Lancer Fuel door

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

Wazzy
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Mon Jun 03, 2013 5:05 pm
Location: Melbourne Australia

Lancer Fuel door

Postby Wazzy » Sat Jun 08, 2013 7:15 pm

Hey everyone

Got my car painted the other day and got it back today, got the lancer chrome door painted white to match the car. Was installing it this arvo and after much frustration couldn't get it to fit the centre properly.. So I'm going to have another go tomoro. But I bought it off eBay for 90 bucks compared to the other ones that were 150 and it didn't come with the o-ring either. Has anyone else had this problem? And would you have the o-ring in it anyway? It would hold water wouldn't it?

So anyway, needed to vent my frustration :D

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Sat Jun 08, 2013 8:12 pm

Hey i installed mine the other week took me 10 mins with the o-ring and it stops any water getting in I love it ... Why did u have so much trouble ?
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

User avatar
Neo
Lancer VR/GT
Lancer VR/GT
Posts: 253
Joined: Mon Apr 09, 2012 7:02 pm
Location: Perth, W.A

Postby Neo » Sat Jun 08, 2013 8:16 pm

i never put the o-ring on my fuel door. i've had it on for 6-7months now.. no problems :)

Wazzy
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Mon Jun 03, 2013 5:05 pm
Location: Melbourne Australia

Postby Wazzy » Sat Jun 08, 2013 10:54 pm

Yeah I dunno, it's just not working for me grr, and I was so excited putting it on then about 1 hour later I was furious cos I couldn't get it to work properly... Ruined my new mod, made me sad :(

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Sat Jun 08, 2013 11:01 pm

un do the bolts slightly so it juggle enough to put the o-ring back on a then do the bolts up again
1998 MR lancer

2009 CJ lancer sportback

2011 Renault Sport RS250 Trophee Cup

2000 Tommi Makenin Evolution 6.5

Wazzy
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Mon Jun 03, 2013 5:05 pm
Location: Melbourne Australia

Postby Wazzy » Sat Jun 08, 2013 11:19 pm

Mine didn't come with a o-ring lol. That's why I think it was only 90 bucks

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Sat Jun 08, 2013 11:33 pm

i paid 70 over gumtree and mine had everything
1998 MR lancer

2009 CJ lancer sportback

2011 Renault Sport RS250 Trophee Cup

2000 Tommi Makenin Evolution 6.5

User avatar
tencents
Lancer Ralliart
Lancer Ralliart
Posts: 587
Joined: Wed Aug 17, 2011 6:26 pm
Location: Sydney, Australia

Postby tencents » Sat Jun 08, 2013 11:38 pm

Should be easy without the o ring, it was a pain with the o ring. The o ring really stops water going in and out.
- GST basemap
- AMS boostpill
- Works High flow drop in air filter
- Evo X BPV
- UR UICP
Image

Wazzy
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Mon Jun 03, 2013 5:05 pm
Location: Melbourne Australia

Postby Wazzy » Sun Jun 09, 2013 9:16 pm

Tried again today, it's on not exactly centre but it'll do lol.

User avatar
bennieboi101
Lancer Newbie
Lancer Newbie
Posts: 35
Joined: Tue Apr 30, 2013 11:07 pm
Location: Sippy Downs

Postby bennieboi101 » Mon Jun 10, 2013 12:30 pm

if it didnt come with a rubber ring, then just get some black silicone and fill that bad boy up!

User avatar
duncs65
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Tue May 21, 2013 11:22 pm
Location: Perth

Postby duncs65 » Mon Jun 10, 2013 2:55 pm

I also had a bit of trouble the O ring actually is a bit of a pain and makes the look on mine uneven i'll try and post a pic when I can work out how to......

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Mon Jun 10, 2013 3:02 pm

210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
duncs65
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Tue May 21, 2013 11:22 pm
Location: Perth

Postby duncs65 » Mon Jun 10, 2013 3:58 pm

Thanx Sleeper having issues with PC now - Ill try with a Mac Later.


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 95 guests