***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Thu May 05, 2011 7:07 pm

ofey wrote:Fixed it.

problem wasn't mitch. It was the post by JaCe


so what caused it to go like that ofey

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu May 05, 2011 7:11 pm

incorrect code... . Should I simulate it for all to see?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Thu May 05, 2011 8:48 pm

jerryme wrote:My sticker came and I put it on :D

Image


PLEEAASEEE TELL ME WHERE YOU GOT THIS D: I NEED ONE!!!
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu May 05, 2011 9:14 pm

Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sat May 07, 2011 7:48 pm

Today I fitted my throttle body back on my car.

I removed it and machined the bore out from 57mm to 61mm. A new butterfly was machined as well. This is the tricky part. This is now the same size as the inlet manifold.

I started the car and it runs fine, just like before.

I soon will put the car on the dyno and hope to see some more power improvements.

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Sun May 08, 2011 4:30 am

Decided that I wanted to be able to dock my iphone... Sadly though I managed to scratch the plastic being an idiot so now its crudely painted.... Still looks good in my opinion (from afar at least).

Image

User avatar
shaine
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Wed Mar 09, 2011 7:54 pm
Location: Brisbane Australia

Postby shaine » Sun May 08, 2011 1:29 pm

Removed decals
ENJOY!! (cj-black)

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun May 08, 2011 5:18 pm

Today I fitted a new drivers seat back leather cover. The old one had scuff marks worn through the leather from me getting in and out of the car.

I also replaced the rear left hand door seal as the old one had shrunk.

Both were replaced for by Mitsubishi under warranty. They were going to fit them but I preferred to do it myself to make sure it was done right.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun May 08, 2011 5:25 pm

Troy can you send me any receipt to show that your dealer replaced yours through warranty? Mine has those scuffs as well.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun May 08, 2011 5:32 pm

ofey wrote:Troy can you send me any receipt to show that your dealer replaced yours through warranty? Mine has those scuffs as well.


No sorry. They just gave me the seat cover with no paper work.

I feel it is an issue with the leather seats as Sam has them to and he has low kilometres on his car as well.

Once they inspected my seat they were happy to replace the seat cover without any issue. It was easy to fit to. Took me about 30 minutes.

User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Sun May 08, 2011 8:06 pm

so does that mean you have a leather seat cover lying around now ..?
Image

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun May 08, 2011 8:09 pm

meaty wrote:so does that mean you have a leather seat cover lying around now ..?


Yes. It will be good to have as I can use it later to fix any other wear marks.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun May 08, 2011 8:12 pm

aspir3 wrote:
ofey wrote:Troy can you send me any receipt to show that your dealer replaced yours through warranty? Mine has those scuffs as well.


No sorry. They just gave me the seat cover with no paper work.

I feel it is an issue with the leather seats as Sam has them to and he has low kilometres on his car as well.

Once they inspected my seat they were happy to replace the seat cover without any issue. It was easy to fit to. Took me about 30 minutes.


Do you then have pictures of your scuffs?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun May 08, 2011 8:37 pm

Sorry it is not a good picture. I need to do in in natural light. It could not be seen with the flash at all.

You can see it is only small area but it has worn through the outer layer of the leather.

Image

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Sun May 08, 2011 9:17 pm

Gave her a nice wash and stuck this on -

Image


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 154 guests