***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

What did you do on your car today?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

Post Reply
tjoz
Lancer Ralliart
Lancer Ralliart
Posts: 699
Joined: Sun Oct 04, 2009 3:51 pm
Location: Melbourne, Australia

Postby tjoz » Sun Jan 09, 2011 7:50 pm

Did this on car today, had left over material from last year when I did my door panels and was bored so went down to Spotlight and got some other stuff.

Image

All made by hand, even the friggen stitching :evil: It took 5hours.... Thought this wont take long, about an hour :lol: Within 15mins I was running around the house looking for the stapler. We dont have an overlocker either. Staples, if its good enough for Mitsubishi to use staples then its good enough for anyone else. It was placed on top of the normal boot thing as it would sag too much if it went on its own. Would have been alot quicker too...

I give it 2weeks before it falls apart :)
User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Sun Jan 09, 2011 8:02 pm

@ Tim lol Thats Funny , Gotta Give you Points For the effort :D
Image
Angels Are Sometimes Disguised As Friends
User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun Jan 09, 2011 8:10 pm

do cf look your car looks neally all cf mate lol
User avatar
kean
Lancer Newbie
Lancer Newbie
Posts: 79
Joined: Fri Aug 27, 2010 12:55 pm
Location: Mawson Lakes, SA

Postby kean » Sun Jan 09, 2011 8:12 pm

Image

Image

Had aspir3 (Troy) to help me put this on this morning. Thanks a lot Troy! :)

Got to wash the car soon.
User avatar
Karl_M
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Sun Dec 19, 2010 4:51 pm
Location: MEL

Postby Karl_M » Sun Jan 09, 2011 8:51 pm

This is my 1st mod. Installed my scuff plates I brough off ebay yesterday.
Excuse the dirt, took the VRX for it's first long drive to the country, the pic was taken when I got back.
Time for a wash I think.....
Image[/img]
User avatar
arutha
Lancer Ralliart
Lancer Ralliart
Posts: 649
Joined: Sun Jul 19, 2009 8:26 pm
Location: Brisvegas

Postby arutha » Sun Jan 09, 2011 10:10 pm

hey tim is it just me or is your gear knob on backwards???
Born at JustJDM's 'ninjaworks' facility,
Honed into a weapon by Mercury Motorsport
Image
User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:
Contact ofey

Postby ofey » Sun Jan 09, 2011 10:16 pm

kean wrote:Image
Had aspir3 (Troy) to help me put this on this morning. Thanks a lot Troy! :)

Got to wash the car soon.


Troy, what is that screw I see above the exhaust tip in the background? Or am I seeing things?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun Jan 09, 2011 10:30 pm

Ofey it looks like a Phillips head screw in the rubber things that you put the arms into hold the mufflers
User avatar
kean
Lancer Newbie
Lancer Newbie
Posts: 79
Joined: Fri Aug 27, 2010 12:55 pm
Location: Mawson Lakes, SA

Postby kean » Sun Jan 09, 2011 10:49 pm

It's the rod with the metal head(part of the exhaust) which going through the re-used rubber socket. I think we pushed the rubber socket too far from the metal head. All fit in nice and tight, however.
User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:
Contact ofey

Postby ofey » Sun Jan 09, 2011 10:50 pm

Ask rthieu to take a picture of his or anyone else for that matter. There is nothing like that... .

It doesn't look like the hanger at all. Mitch is right in a way, it looks like a philips head screw. Though it's a wee bit blurry so I can't tell from here.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors
User avatar
kean
Lancer Newbie
Lancer Newbie
Posts: 79
Joined: Fri Aug 27, 2010 12:55 pm
Location: Mawson Lakes, SA

Postby kean » Sun Jan 09, 2011 11:33 pm

I'll have a look at it tomorrow and take pics of that.

Thanks :)
User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jan 10, 2011 7:49 am

Ofey from memory it is the thread of the bolt and 2 nuts on there you can see.

I pushed the bolt through the rubber hanger from the front of the car. I then fitted 2 nuts on it to stop it from coming loose.

Kean can you double check all hangers and bolts as it looks in the picture like the nuts have come off.
User avatar
kean
Lancer Newbie
Lancer Newbie
Posts: 79
Joined: Fri Aug 27, 2010 12:55 pm
Location: Mawson Lakes, SA

Postby kean » Mon Jan 10, 2011 9:45 am

This is what we are looking at.

Image

Image
User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jan 10, 2011 9:48 am

lol so it is just the end of the hanger out of focus. It must have a reflection off the end of it too.
tjoz
Lancer Ralliart
Lancer Ralliart
Posts: 699
Joined: Sun Oct 04, 2009 3:51 pm
Location: Melbourne, Australia

Postby tjoz » Mon Jan 10, 2011 2:54 pm

arutha wrote:hey tim is it just me or is your gear knob on backwards???


Yes its backwards :) I like it that way. The normal way it feels strange so I turned it around and it fits in the palm of my hand. Easier to change the gears for me
Post Reply

Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 135 guests