Group Buys
Posted: Thu Jan 08, 2009 12:24 pm
This thread is now closed. Group buys for individual items are now split into separate threads.
ClubCJ - The CJ Lancer Club
Group Buys
Page 1 of 7
Posted: Tue Mar 31, 2009 3:02 pm
id be interested in getting the RRM timing module if i can get my hands on the money. is that in AUD or US dollar?
Posted: Tue Mar 31, 2009 3:41 pm
That is in Aussie Dollars.
We need at least 5 people on any of those items to give me a chance of negotiating a Club purchase price.
We need at least 5 people on any of those items to give me a chance of negotiating a Club purchase price.
Posted: Tue Mar 31, 2009 3:44 pm
Pity We've only got 2 people in Cairns 
Flyers on the way Oz?
Flyers on the way Oz?
Posted: Tue Mar 31, 2009 3:47 pm
dont waste your money on the RRM timing module or piggyback.
get all your mods done and then get a piggy back installed. A haltech interceptor costs about $1500 including all the dyno runs to get the best out of the tune its given which when you work out the cost of the RRM gear in AU with shipping you'll come close to this value anyway.
The haltech can do everything plus more that the RRM timing module and piggy back do and seeing as its customised to your car it will get a higher gain.
RRM cant make an extractor that lasts longer than two weeks (and they couldn't care less about this), would you be trusting something they make which interferes with the operation of your ECU?? I know I wouldn't.
get all your mods done and then get a piggy back installed. A haltech interceptor costs about $1500 including all the dyno runs to get the best out of the tune its given which when you work out the cost of the RRM gear in AU with shipping you'll come close to this value anyway.
The haltech can do everything plus more that the RRM timing module and piggy back do and seeing as its customised to your car it will get a higher gain.
RRM cant make an extractor that lasts longer than two weeks (and they couldn't care less about this), would you be trusting something they make which interferes with the operation of your ECU?? I know I wouldn't.
Posted: Tue Mar 31, 2009 4:04 pm
Josh_Emerton wrote:Pity We've only got 2 people in Cairns
Flyers on the way Oz?
It doesn't matter, Josh, we ship all to somewhere in Australia, be it Cairns or Melbourne, then re-distribute from there.
Posted: Tue Mar 31, 2009 4:07 pm
Ryan_C wrote:dont waste your money on the RRM timing module or piggyback.
get all your mods done and then get a piggy back installed. A haltech interceptor costs about $1500 including all the dyno runs to get the best out of the tune its given which when you work out the cost of the RRM gear in AU with shipping you'll come close to this value anyway.
The haltech can do everything plus more that the RRM timing module and piggy back do and seeing as its customised to your car it will get a higher gain.
RRM cant make an extractor that lasts longer than two weeks (and they couldn't care less about this), would you be trusting something they make which interferes with the operation of your ECU?? I know I wouldn't.
Thanks for your thoughts Ryan_C. I'll take your expert opinion on the matter and chuck the Advanced Timing module.
Posted: Tue Mar 31, 2009 5:09 pm
I'd hardly call it a expert opinion! 
i just wouldn't trust RRM to buy anything off them again and would be worried about frying my ECU using their piggy bag. It ended up costing me $230 to get the flex joint repaired in my extractors and I am lucky I picked up the change in the exhaust note otherwise I imagine I could potentially have risked damaging the motor...
On the note of pulleys I have the RRM V2 (has the hardened steel sleeve) which I have decided I cant be bothered putting on. That MAM one you've listed is actually $125US ($180ish AU). I'm asking $150 for mine inclusive of registered or express post at the buyers choice.
Posted: Tue Mar 31, 2009 5:33 pm
yeah actually, i read some of the reviews and testimonys that are out on the piggy back. Thumbs down. Not enough of a gain for the money. And im really tempremental when spending money when it comes to my CJ
Posted: Tue Mar 31, 2009 5:34 pm
and with that exhaust, is that a univeral muffler/resonator thing?
Posted: Wed Apr 01, 2009 8:20 pm
yes tadzorz you then need a shop to make up some pipe and weld it all up with a nice tip!!
Posted: Fri Apr 03, 2009 12:00 pm
Ryan_C wrote: That MAM one you've listed is actually $125US ($180ish AU). I'm asking $150 for mine inclusive of registered or express post at the buyers choice.
It was US$60/- with Worldwide shipping a couple of days ago. Oh well... .
Posted: Sun Apr 05, 2009 9:32 am
group buy with the 09 vrx clear tailights? ill look into it?
Posted: Sun Apr 05, 2009 11:45 am
leevin wrote:group buy with the 09 vrx clear tailights? ill look into it?
As much as I like them, I'm not keen on shelling out so much for something which already works. Still if you're keen, ask nickd @ preston motors to see if he can get us a good deal.
Posted: Sun Apr 05, 2009 1:51 pm
Whats so good about the Borla muffler?