ClubCJ - The CJ Lancer Club

Round 3:
I've been asked by some people to reopen this.

This group buy is for the only off the shelf improvement you can get for your car which is guaranteed to work.

We will be taking orders for both 2.0 and 2.4L versions.

The Injen CAI with Hydrosock:


Price:
Opening gambit are as follows:
2.0L 4B11 - SP1835 $395 AUD
2.4L 4B12 - SP1836 $410 AUD
2.0L 4B11 Turbo - SP1837 - Price unknown at this point

Hydrosock will be A$30 more and included in each box.


AS on 10 Oct 2010, we have a quote from SpeedCorps at:

SpeedCorps wrote:Prices are in US$ and include hydroshields
SP1835 $360
SP1836 $375
SP1837 $390

Shipped INDIVIDUALLY

EOI List Round 2:

EOI List Round 2:

VIC (1 Shipment)
All SP1835:
1. Nicho 2.0 - Polished Piping - Black Shield VIC
2. exaltd 2.0 - Polished - Red VIC

NSW (2 Shipment)
SP1836:
3. EEV00L 2.4 - Polished - Black NSW
4. MrCharisma 2.4 - Polished - Red NSW
5. VRX-Pete 2.4 - Polished - Black NSW
6. AussieCJ 2.4L - Polished - Black NSW
SP1835
7. l0n3w01f 2.0 - Polished - Black NSW
8. BRO-027 2.0 - Polished - Black Shield NSW

QLD (2 shipments)
SP1836:
9. Paggsy 2.4 - Polished - Black QLD
10. AJjnr86 2.4 - Polished - Black QLD
SP1835:
11. Draevon 2.0 - Polished - Black QLD
SP1837:
12. Andy85 RA 2.0 - Polished - Black QLD
Hydroshields only
13. Blakey - Black Shield Only QLD
14. zedd82 - Black Shield ONLY QLD

Round 1
I was reading the Round 1 group buy thread today and was wondering if there would be any interest in a 2nd round??

Possibly this time around we can include the Injen CAI (part #SP1836 for the 4B12's)??

I havent the foggiest on prices or anything like that I'll leave that to the pros *wink wink*, anyways I have spoken with Ofey and Blanka so now its over to you fine folks to raise your hand if your like me if your keen Hopefully with some numbers we can look into it further.

Cheers - Krispy

EOI - Rd 3
1. Dirtee (ACT) = SP1835P +Red Hydroshield
2. timmo91 (NSW) = SP1835B +Red Hydroshield
3. Schumiefan(NSW) = SP1836B +Blue Hydroshield
4. VRX-Pete (NSW)=Black Hydroshield
5. Justin-R (NSW)=SP1835P + Black Hydroshield
6. tuanzo (VIC) = SP1835 +Red Hydroshield
7. Vlad_the_impaler (VIC) = Blue Hydroshield
[s]8. T-Rex (QLD) = SP1836P + Red Hydroshield
9. funnyfi (NSW) = SP1836P + Hydroshield
10. BRE88N (NSW) = SP1836P + Blue Hydroshield[/s]
11. AdamD (NSW) = SP1835P + Red Hydroshield
12. JaZira5 (QLD) = SP1835P + Black Hydroshield

SP1835 + hydroshield $355USD ~ A$340
SP1836 + hydroshield $365USD ~ A$350
Hydroshield Delivered ~ A$25 (A$20 if you hitch a ride in a box)

id be down too. maybe end of next month though? haha.

do you need to take out the front bumper to fit this?

i helped a couple of mates install it in there cars and we didnt! all we did was remove the front passenger side wheel, then remove the splash guard/wheel well (or whatever its called lol).

I'm going to push this through. So far there are 2 EOIs:

1. krispy
2. leevin
3.

Anymore? I need at least 5 to make this worthwhile.
i'll be upgrading this post to a sticky

/BUMP *WTB more interest lol*

Come on guys... I'm following this topic and can see there’s interest.

Correct me if I'm wrong but this is purely an EOI to start getting some prices, if they end up been too high then we can all take a step back

i'm still thinking lol , i got a pretty new K&N drop in filter

planning on saving the money for a new exhaust

i guess you could just put me up for EOI and see how things go

btw how much did the first round went for , from door to door ?

lpy2009 wrote:i'm still thinking lol , i got a pretty new K&N drop in filter

planning on saving the money for a new exhaust

i guess you could just put me up for EOI and see how things go

btw how much did the first round went for , from door to door ?

the price for the first group buy was just over $500Aus delivered but remember that when we did the first group buy the Aus$ was not as strong as it is now so you might get it cheaper now

I got a quote from Speedcorps for the following the Injen CAI - SP1836 (09 2.4L Mitsubishi Lancer VRX/GTS) + Black Hydro shield (x-1033)

Yes I can get that intake even though it's not on the website. I could get you the items for around $485 AUD. I'm not sure what kinds of import/customs fees you might you might be charged though. That's just an estimated price including $85 for USPS Express Mail International

Now this is a rough quote, so all we can do is see what they are willing to offer later on down the track

Any picture of the CAI. after pictures ill probably go for one

Here is the flyer

http://www.injen.com/Galleries/ProductPress/SP1836P.jpg

Here is one installed



Here are the Hydro Socks



Pretty sexy eh eh

Will these fit the 2.0L 4B11. iv been told the 4B11 and 4B12 are exactly the same besides bore and stroke. so parts are interchangeable for both in the matter of intakes.

If so then put me down for one. do they come blue or can they be other colours or polished silver?

SP1836 for the 4B12's

The last group buy was for the 4B11's theres a different part number but I dont have it on me at the moment

btw , will this fit the aspire ?

the aspire comes with OEM HID so the light seems to be taking up the space where the pipe goes down

Honestly couldn't tell you Ipy... sorry

I'm actually chasing some infor myself... anyone know if I'm going to run into issues having the CVT??? I remember reading "Manual only" on an online ad but I cant find it again to confirm.