Hi guys,
I am not sure if Auto-Locker has those E marks on their DRLs. They DO NOT make any product for overseas, they are happy enough with what they get from their local market. They are a small company of lancer enthusiasts. They are passionate about what they create. It includes DRLs.
I have included the legislative requirements for Russian cars. They are the same for Australian's.
If a letter E or something else is important for someone, I am pretty sure they do not have this marking on the lenses. Even though the brightness is made according to the regulations in Russia and is the same as in Australia. I suppose it is dictated by common sense of driving conditions and safety.
I personally would will to proceed with their DRLs. I know that it is going to be within what is required by legislation in Australia. This is the most important issue. I've got red blood in my veins, not "red tape".
Again, Auto-Locker's guys are enthusiasts, a small company and do NOT undergo any complicated and costly official expertise for their equipment. It is your own decision if it is acceptable in your own case. If you wnat to be diffrent with your cars with bearing some known issues?
Anyways they are recognized locally for their superior attitude and quality of their products. This is what I know for sure!
I've just talked to some friends in Moscow. They told me that they will be able to organize very cost effective delivery. They have estimated the delivery of 10 diffusers. The cost is about $300 for 10 diffusers. Diffusers are empty from inside and plenty of small gear can be placed inside them and they we'll be able to travel almost for free!
I've been in business there for long time, still have strong connections to make the things real for you guys.
I would suggest to close EOI, and place an inquiry and we'll see where we are with the real figures.
Ofey, may be we could place some inquiry already?
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Russian Website Parts Auto-loker GB
Moderator: Senior Moderators
- vlad_the_impaler
- Lancer ES/EX
- Posts: 188
- Joined: Sun Mar 08, 2009 11:15 am
- Location: St Kilda East, VIC, Australia
Fisherrr wrote:Hi guys,
I am not sure if Auto-Locker has those E marks on their DRLs. They DO NOT make any product for overseas, they are happy enough with what they get from their local market. They are a small company of lancer enthusiasts. They are passionate about what they create. It includes DRLs.
I have included the legislative requirements for Russian cars. They are the same for Australian's.
If a letter E or something else is important for someone, I am pretty sure they do not have this marking on the lenses. Even though the brightness is made according to the regulations in Russia and is the same as in Australia. I suppose it is dictated by common sense of driving conditions and safety.
I personally would will to proceed with their DRLs. I know that it is going to be within what is required by legislation in Australia. This is the most important issue. I've got red blood in my veins, not "red tape".
Again, Auto-Locker's guys are enthusiasts, a small company and do NOT undergo any complicated and costly official expertise for their equipment. It is your own decision if it is acceptable in your own case. If you wnat to be diffrent with your cars with bearing some known issues?
Anyways they are recognized locally for their superior attitude and quality of their products. This is what I know for sure!
I've just talked to some friends in Moscow. They told me that they will be able to organize very cost effective delivery. They have estimated the delivery of 10 diffusers. The cost is about $300 for 10 diffusers. Diffusers are empty from inside and plenty of small gear can be placed inside them and they we'll be able to travel almost for free!
I've been in business there for long time, still have strong connections to make the things real for you guys.
I would suggest to close EOI, and place an inquiry and we'll see where we are with the real figures.
Ofey, may be we could place some inquiry already?
the Emark, is a online regualtion for car products,(pretty much) every country, will have a specific. Emark number that is accetable in there country. some places like australian. accept the standards of other countries to be used in australian vehicals. so not only the Emark for australia, but the Emark of other countries. as well. not all but there is a few,
being a russan, and if they are a propper business, then they should have gotten there product accepted to there regulations( like our ADR) in do that they also get an Emark.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Fisherrr wrote:I would suggest to close EOI, and place an inquiry and we'll see where we are with the real figures.
Ofey, may be we could place some inquiry already?
Fisherrr if you've tallied up the EOIs, I suggest you post up a list , allow people to check that list and when confirmed send it over.
In my experience there'll be some people who will magically run out of money when it's time to pay and there'll be some who see the price and then want to join in. So these things balance themselves out. I would suggest you group the list by state as it may be more cost effective to ship to 1 person within each state.
But once you have a list up, you can proceed to send the Russians an email asking for a quote.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Blakey wrote:the Emark, is a online regualtion for car products,(pretty much) every country, will have a specific. Emark number that is accetable in there country. some places like australian. accept the standards of other countries to be used in australian vehicals. so not only the Emark for australia, but the Emark of other countries. as well. not all but there is a few,
being a russan, and if they are a propper business, then they should have gotten there product accepted to there regulations( like our ADR) in do that they also get an Emark.
Blakey their email address is on their site. If you wish to engage in a debate about the fact that a proper business like theirs should have gotten their product Emarked perhaps you should ask them directly. Please do not mention that you're associated with us.
Fisherrr was relaying exactly what they told him.
I'm wondering what you gain from pointing out that they should... . I would point out that alot of people should do certain things but they don't... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
After navigating my way through this thread, here's Santa's list:
VIC
luffy4688 = DRL + Lighted Logo
twr75 = Lighted Logo X 2
R4PTOR = Central Lip + Rear Diffuser with Single Tip
Fisherrr = Front eyelids + Rear Eyelids + Rear Diffuser with Single Tip (W37) + Carpets + DRL + Bonnet Struts + Airdams(W37) + Central Lip (W37)
vlad_the_impaler = Front eyelids (A39) + Rear Eyelids (A39) + Airdams(A39) + Central Lip (A39)
rthieu = Front Lip (HOS Lookalike) (X42)
ofey = Lighted Logos X 2
NSW
liam92 = Side mount license plate (D06 or Black) + Lighted Logos X 2
SPRKLS = DRK (P26)
Chubb = Central Lip (D06)
SAM-24A = Scuffplates (Lancer logo)
feral = Lighted Logo X 2
Mizta_B = Lighted Logo X 2 + Central Lip (P26)
ash06 = Central Lip
Bandit = Central Lip (W37)
foreshadow = Central Lip + Rear Diffuser with Single Tip + Lighted Logo X 2 + DRL
BRO-027 = Bonnet Struts + Airdams(X42) + Rear Diffuser with Single Tip
bd-850 = Central Lip (Matte Black)
QLD
draevon = DRL
Speedie = Side mount Licence Plate
AJjnr86 = Bonnet Struts + Light Illumination Optics + Front Lip Kit
Tarquin = Rear Roof Spoiler + Bumper Protector Strip
SA
Tenjho = Central Lip + Rear Diffuser with Single Tip
kean = Airdams(P26) + Central Lip (P26) + Front eyelids (P26)
WA
Itachi = Central Lip (Matte Black)
VIC
luffy4688 = DRL + Lighted Logo
twr75 = Lighted Logo X 2
R4PTOR = Central Lip + Rear Diffuser with Single Tip
Fisherrr = Front eyelids + Rear Eyelids + Rear Diffuser with Single Tip (W37) + Carpets + DRL + Bonnet Struts + Airdams(W37) + Central Lip (W37)
vlad_the_impaler = Front eyelids (A39) + Rear Eyelids (A39) + Airdams(A39) + Central Lip (A39)
rthieu = Front Lip (HOS Lookalike) (X42)
ofey = Lighted Logos X 2
NSW
liam92 = Side mount license plate (D06 or Black) + Lighted Logos X 2
SPRKLS = DRK (P26)
Chubb = Central Lip (D06)
SAM-24A = Scuffplates (Lancer logo)
feral = Lighted Logo X 2
Mizta_B = Lighted Logo X 2 + Central Lip (P26)
ash06 = Central Lip
Bandit = Central Lip (W37)
foreshadow = Central Lip + Rear Diffuser with Single Tip + Lighted Logo X 2 + DRL
BRO-027 = Bonnet Struts + Airdams(X42) + Rear Diffuser with Single Tip
bd-850 = Central Lip (Matte Black)
QLD
draevon = DRL
Speedie = Side mount Licence Plate
AJjnr86 = Bonnet Struts + Light Illumination Optics + Front Lip Kit
Tarquin = Rear Roof Spoiler + Bumper Protector Strip
SA
Tenjho = Central Lip + Rear Diffuser with Single Tip
kean = Airdams(P26) + Central Lip (P26) + Front eyelids (P26)
WA
Itachi = Central Lip (Matte Black)
Last edited by ofey on Wed Nov 03, 2010 7:30 pm, edited 2 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 6 guests