"Installation of the Front Bumper Under V-Lip is by mounting screws professional installer is Recommended ."
From the dudes listing on Ebay. Maybe someone else can give you a more detailed explanation.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Body Kit (V&C F-Lip + Evo Bump/Fender) Group
Moderator: Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Josh_Emerton wrote:I'm interested to know how the centre lip fits on, like where are the left/right extreme's of the lip and how does it attach, how secure etc
I believe Josh is referring only to the center lip.
The part is shown here:
So you can see from the pic, the ends are where the front air dams are. For both the full lip and the center lip, you will need the front air dams.
From my email with VOX Motorsports:
2 screws to be drilled in from the bottom of your car. instructions provided.
As for secure, I think they won't rattle considering that they'll be clipped tight on the top and screwed in on the bottom. Too secure is a problem also as if you go over a hump and scratch it, the scratch may pull on it and rip out your front grill. So I think abit of lag has to be given for it to shift.
I've never had the part so I won't know till I get the V-Lip.
After ripping out the whole interior for my car to install sound deadening, installing Shadow's auto fold mirrors, and doing a couple of front vinyls for people, I don't think so much about installs these days. I just do them.
- Speedie
- Lancer MASTER
- Posts: 1751
- Joined: Thu Mar 05, 2009 11:42 pm
- Location: Brisbane, QLD, Australia
So this is (a)http://www.newpages2u.com/products.php?id=5679&lang=&cat=MITSUBISHI%20LANCER%2008
And (b) is http://www.newpages2u.com/products.php? ... ANCER%2008.
If thats correct I'lltake an A
And (b) is http://www.newpages2u.com/products.php? ... ANCER%2008.
If thats correct I'lltake an A
[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
That's the only way I'm going to accept payment actually so it's ALL Recorded. No additional charges. If you do paypal, there's a commission so no no for me.
By this, you won't worry about not having a receipt.
By this, you won't worry about not having a receipt.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 20 guests