*CLOSED* Russian Website Parts Auto-loker GB

[AJjnr86]

Grrrr, hardly anything for the rear of the sportsback

Im gonna kick the cat now

[bd-850]

do these instuctions/tips come in russian?

I & Vlad will be happy to sort it out. It is not a rocket science to install those gear.

Pictures tell a thousand words, as long as there are pics you SHOULD be right. i said SHOULD

[AJjnr86]

ok well looks like im in for an EIO on the first three parts that im looking at. Guess i need to pay a visit to some body shops and c what custom rear kits they can do for me

[liam92]

I thought about wiring the emblems up to the lights so when they turn on at night you get the glow.

Ill go down on the EOI for both front and rear emblems and a side numberplate. Dependant on numbers and shipping! If we can get the price down below $100 an emblem Im in.

[Fisherrr]

Out of curiosity, does the front central lip act like an air splitter? I can't really tell if there is a gap for the air to pass through or if in fact it will actually catch air (if it is sealed at the back) and therefore hinder airflow?

This front lip act as an AIR SPLITTER. it doesn't catch the air, there is a hole there along the lip.

This lip is made of ABS plastic. It is available in matt black and all lancer colours as well.

[Itachi]

This GB just gets better and better I'm so keen for this stuff and we are still in the EOI phase! Thanks again Nick

[foreshadow]

Im assuming its easy enough to wire in those driving lights for those of us with no fog lights already installed?

[Fisherrr]

Im assuming its easy enough to wire in those driving lights for those of us with no fog lights already installed?

Hi Guys,

There will be given all instructions and tips for DIY where required, some photos will be provided if required. I will take all wording into English and that's it.

All this installation is not difficult, the guys from Auto Locker are happy to provide tips and instructions.

[Fisherrr]

Im assuming its easy enough to wire in those driving lights for those of us with no fog lights already installed?

I dont think it is simple if there is NO pre-installed fog lamps. If you like to have DRLs working same way as fog lamps, then a dash board button will be required. Basically they are switched on and off separately from the other lighting. I personally have no idea how to perform this, I think there is a DIY on this forum?

I will have to ask Auto Locker if they supply all wires and a button as in the case of fog lamps.

if DRLs are connected to your lights and switched on/off with the lights, then installation shouldn't be complicated. This means you will have your DRLs ON all the time you lights are on.

I hope this makes sense.

[foreshadow]

Yeah completely understand. Was half hoping that all CJ lancers had the wiring already installed, and was just the variations without fog lights that obviously had nothing hooked up. blank switch ect.. If that makes sense.

But regardless its pretty easy to hook up yourself as long as they supply the wiring and switch, as can be seen here.

http://forums.evolutionm.net/lancer-how-tos-installations/431771-how-install-ebay-fog-lights.html

[Mizta B]

Hi Ofey
EOI on the following please:
Front and Rear Lit Tri Diamond Emblems
Centre Lip in P26 Rally Red
Thanks mate
Regards, Chris.

[ash06]

I'm in EOI for center lip depending on when this goes down
Hopefully will pay off a few additions to my car by then, & have enough in the budget

[AJjnr86]

i wonder if i got the rear lip, if i could get it fitted to my sportsback but a body shop????

[Itachi]

Any more info on these lights (not the mitsu badge)?


Like how difficult is the install? (do we need to bake our lights like for angel eyes? etc)

[AJjnr86]

Also quickly, what temp range is their ABS plastic rated at? Won't help us any if it's not made for our temps