***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED*-Dynamat Bulk Paks
Moderator: Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
@ exaltd: If you're going to be tracking your car, there is no sense in dynamating your ride. Put your money eslewhere. A track car is supposed to be as light or as lean as possible. IF I was tracking my ride, I would also look to take out the rear seats?
@ lpy2009: I know from dynamat's online store that a lite Bulk Pak pack is listed as US$350.00 while the normal bulk pak we're getting is US$310.00. So it may be US$40.00 more if available at all? And please don't convert at today's rates. The sellers don't convert price at the point of sale to you.
@ trough: Added.
@ lpy2009: I know from dynamat's online store that a lite Bulk Pak pack is listed as US$350.00 while the normal bulk pak we're getting is US$310.00. So it may be US$40.00 more if available at all? And please don't convert at today's rates. The sellers don't convert price at the point of sale to you.
@ trough: Added.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
trough wrote:Just wondering if 1 pack would do two rear boots. 1 is a tj magna the other my cj lancer. If it can do both i'm in for 1 pack.
Cheers
Tim
Yup that was me and leevin. If i had cut mine a little more acuratly, i would have gotten more coverage, BUT, you can cover about 90% of the whole boot with half a bulk pack. The parts i didnt cover were actually the top of the inside of the boot, like where the boot light is etc. I just used scrap pieces i had to cover a bit more area because all the big pieces were used on the boot floor sides etc.
- Mr Charisma
- Lancer Evolution
- Posts: 876
- Joined: Wed Apr 29, 2009 9:09 pm
- Location: Central Coast, Straya.
tjoz wrote:Would one pack do all 4 doors?
Yes - you could do both inner or outer skins. You would need just under 1 sheet per door skin so about 7-7.5 sheets. The remaining 1.5-2 sheets do come in handy for the boot.
I wouldn't worry about the light stuff. A normal bulk pack only weighs around 11Kg in it's box.
Love that car!
- tadz0rz
- Genius
- Posts: 6955
- Joined: Sun Mar 08, 2009 8:54 pm
- Location: Melbourne, VIC, Australia
- Contact:
Usually people take off that plastic thing because the black sealant thing around it will be covered and it actually mainly sticks to the body of the car and not the plastic. So, even if you did want to keep it on, the dynamat would cover the sealant and you wouldnt have much of a chance re attachting the plastic.
Probley sound better without it aswell lol
Probley sound better without it aswell lol
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
At this current number of 7 bulk paks, we're NOT going to hit even the minimum number. We're 11 days into the month. I have to close this by the middle of the month so we can start planning for next month... .
anyone?
anyone?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 4 guests