***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
* Mitsubishi OEM Parts for ClubCJ Members *
Moderator: Senior Moderators
Thanks for that ofey, but maybe I confused you or your contact...
The part I am after more than anything is this: (I finally managed to track a picture down, and I found the part No too)
Part #: 8011A267
I was also after the switches, but I have since found them elsewhere albeit from a wrecked Evo 8 FQ330
Sorry to be a pain mate! You might as well go ahead and order that 8011A267 part, as I know that is exactly the part I require. Let me know how much and I'll forward you the money.
Thanks again, and sorry for being a pain!
The part I am after more than anything is this: (I finally managed to track a picture down, and I found the part No too)
Part #: 8011A267
I was also after the switches, but I have since found them elsewhere albeit from a wrecked Evo 8 FQ330
Sorry to be a pain mate! You might as well go ahead and order that 8011A267 part, as I know that is exactly the part I require. Let me know how much and I'll forward you the money.
Thanks again, and sorry for being a pain!
- Deano1964
- Lancer Evolution
- Posts: 773
- Joined: Tue Mar 17, 2009 12:22 am
- Location: Melbourne, VIC, Australia
v) Olympic Ed./Aspire Front Grill Set
i)7450A462 GRILLE-RADIATOR (MAIN GRILLE) = (A$246.00)
ii) 6400C109 GRILLE-FR BUMPER-M-SILVER(M LOWER GRILLE) = (A$88.00)
iii) 6400C043 GARNISH-FR BUMPER-CTR-CHROME (LOWER GRILLE SURROUND) = (A$182.00)
Total = A$516.00
Would you be able to get me a price for the platinum top grill? Is it the same price as 7450A462 GRILLE-RADIATOR (MAIN GRILLE) = (A$246.00)
Thanks for all ur effort with this thread!!
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
deano1964 wrote:Would you be able to get me a price for the platinum top grill? Is it the same price as 7450A462 GRILLE-RADIATOR (MAIN GRILLE) = (A$246.00)
Thanks for all ur effort with this thread!!
Yeap, that's the one.
Cheers... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- Scott_VRX_Fan
- Lancer VR/GT
- Posts: 212
- Joined: Sat Apr 18, 2009 5:35 pm
- Location: Cranbourne, VIC, Australia
just out of interest ofey.
im finally getting my boot and front bumber repaired.
but my question, if you can source it, is whats the difference between a vrx front bumber/grilles etc.. and a ralliart front bumber/grilles?
looks like i will have to replace the front bumper of my vrx, and if they insurance is happy to do it, and it isnt too much, i may get the ralliart front instead and pay the difference.
just a general idea, if you have that infomation handy.
im finally getting my boot and front bumber repaired.
but my question, if you can source it, is whats the difference between a vrx front bumber/grilles etc.. and a ralliart front bumber/grilles?
looks like i will have to replace the front bumper of my vrx, and if they insurance is happy to do it, and it isnt too much, i may get the ralliart front instead and pay the difference.
just a general idea, if you have that infomation handy.
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
Scott, the difference is the bumper, grilles, fog lights and fog light grilles, chrome strip and badges.
It does bolt up, but you might be out of pocket a fair bit as if you only need to replace your bumper then the panel beater would reuse all of your other bits on your new bumper.
Hope that helps mate.
It does bolt up, but you might be out of pocket a fair bit as if you only need to replace your bumper then the panel beater would reuse all of your other bits on your new bumper.
Hope that helps mate.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I will be getting that info soon. As you can appreciate there are quite a number of parts involved. Will take some time for him to collate.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
All RA badges have been accounted for:
1. The_Bandit
2. SIR-VRX
3. Stalker
4. Marsh
5. tyrg
6. JMI
7. Ash06
8. lzy_eye
sorry. Now we wait for December.
1. The_Bandit
2. SIR-VRX
3. Stalker
4. Marsh
5. tyrg
6. JMI
7. Ash06
8. lzy_eye
sorry. Now we wait for December.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- Scott_VRX_Fan
- Lancer VR/GT
- Posts: 212
- Joined: Sat Apr 18, 2009 5:35 pm
- Location: Cranbourne, VIC, Australia
SIR-VRX wrote:Scott, the difference is the bumper, grilles, fog lights and fog light grilles, chrome strip and badges.
It does bolt up, but you might be out of pocket a fair bit as if you only need to replace your bumper then the panel beater would reuse all of your other bits on your new bumper.
Hope that helps mate.
they are going to replace the bumper, top and bottom grilles.
they could re-use the fog light grilles i have on my vrx?
so it would leave the chrome strip being the only difference? surely that isnt too much?
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
- Scott_VRX_Fan
- Lancer VR/GT
- Posts: 212
- Joined: Sat Apr 18, 2009 5:35 pm
- Location: Cranbourne, VIC, Australia
ahh well, if its too expensive will just leave it as it is
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
It's always going to be expensive since they are Ralliart parts. Don't expect the difference to be in the X00s. We're talking at least X000s in difference. Regardless of the discounts we as a club get.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- Scott_VRX_Fan
- Lancer VR/GT
- Posts: 212
- Joined: Sat Apr 18, 2009 5:35 pm
- Location: Cranbourne, VIC, Australia
just got the quote, they dont need to replace the bumper, can fix it, and repaint it.
hoping they will do me a favour and attach my c-lip and paint it all proper like in one job
that works for me as well.
hoping they will do me a favour and attach my c-lip and paint it all proper like in one job
that works for me as well.
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear
Mods To Be Completed
Front Bumper Upgrade
Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav
- LAOS
- INACTIVE Member Account
- Posts: 25
- Joined: Wed Jul 15, 2009 9:30 pm
- Location: Brisbane, QLD, Australia
Hey!
I have the Rockford Fosgate system with the red/white-3.5mm MP3 player auxillary input, is this different to the MZ360221EX - MMCS iPod Cable? If so where abouts does this cable plug into and is it the type that charges your ipod and controls the ipod from the stereo unit?
Cheers
I have the Rockford Fosgate system with the red/white-3.5mm MP3 player auxillary input, is this different to the MZ360221EX - MMCS iPod Cable? If so where abouts does this cable plug into and is it the type that charges your ipod and controls the ipod from the stereo unit?
Cheers
2008 red VRX sedan rear spoiler side skirt and front bumper accent trims rockford fosgate/sunroof package
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
vrxbaby wrote:Hey!
I have the Rockford Fosgate system with the red/white-3.5mm MP3 player auxillary input, is this different to the MZ360221EX - MMCS iPod Cable? If so where abouts does this cable plug into and is it the type that charges your ipod and controls the ipod from the stereo unit?
Cheers
Yes the part MZ360221EX is different. It's an iPod socket cable and plugs into, charging and allowing control of the ipod or iphone3G via the audio control buttons. However, as it mentions there, it only works with a MMCS. So unless you have an MMCS, this won't work for you.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 29 guests