Aaaarrrgg!! If only I saw this on Saturday!! I had my wheels off doing a rotation, and it would've taken me 5 extra minutes to remove the pads!!!
Tell you what ofey, tomorrow I will pull of the wheels again and get the pad and rotor dimensions and photos. No big issue for me. Nothing better to do with my day lol.
Will get back to you on this.
--
I'm interested in EBC Red stuff pads for the VRX Fronts. Cheers.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* EBC Pads & RDA Rotors
Moderator: Senior Moderators
Pics of front VRX front pads sent to you now ofey....
Also have been talking to Henry from Hen's Performance and he was saying red stuff for the rears will be ineffective as we aren;t going to generate much heat in the rears. In his mirage he uses blacks even for the track. He recommends we go for Greenstuff rear pads, so I'm going to take his advice! Also means that we won't have to mcuk around getting them from the states anymore!
I was also already planning on draining the fluid and replacing it with Nulon Super DOT4 and he reckons that this stuff is very reliable!
Also have been talking to Henry from Hen's Performance and he was saying red stuff for the rears will be ineffective as we aren;t going to generate much heat in the rears. In his mirage he uses blacks even for the track. He recommends we go for Greenstuff rear pads, so I'm going to take his advice! Also means that we won't have to mcuk around getting them from the states anymore!
I was also already planning on draining the fluid and replacing it with Nulon Super DOT4 and he reckons that this stuff is very reliable!
Yeah he said Reds would be what I'd need in the front to handle hard braking.
If you dont plan on tracking it or going on long roads where you're going quick and there's lots of braking you may need it, but otherwise you'll probably only need greenstuff fronts.
I plan on going back to Wakefield Park so I'll be needing the reds
If you dont plan on tracking it or going on long roads where you're going quick and there's lots of braking you may need it, but otherwise you'll probably only need greenstuff fronts.
I plan on going back to Wakefield Park so I'll be needing the reds
You guys haven't driven on the road I drive on. I give the brakes a good run down this mountain range, and I do get some fade when braking for the really hard corners. I'm talking about coming down form 100-120 to 40 in a short distance. Then the same for the next corner. And the next haha so fun but all legal. no need to worry about the cops on that road
So by the sounds of that, Redstuffs might be for me. I may take it on the track one day, dunno yet. Depends if my mate wants to go in his T5 Volvo. He is quicker in a straight line, but I brake harder and handle better. He has EPIC understeer when going into a corner hot. I though the Lancer was bad haha
So by the sounds of that, Redstuffs might be for me. I may take it on the track one day, dunno yet. Depends if my mate wants to go in his T5 Volvo. He is quicker in a straight line, but I brake harder and handle better. He has EPIC understeer when going into a corner hot. I though the Lancer was bad haha
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Right all the prices should be there now except for Red Stuff rears which I've already explained.
If you're going to order, please post a reply like mine (don't bother with description. Part numbers cannot be wrong):
ofey (O.Ed.): RDA7896G + DP21614 + DP61407 = A$430.00
Your car model in brackets will act as a double check for RDA.
All VIC pay the price seen.
I will group ship to any other state at cost.
If you're going to order, please post a reply like mine (don't bother with description. Part numbers cannot be wrong):
ofey (O.Ed.): RDA7896G + DP21614 + DP61407 = A$430.00
Your car model in brackets will act as a double check for RDA.
All VIC pay the price seen.
I will group ship to any other state at cost.
Last edited by ofey on Mon Jul 20, 2009 11:18 pm, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Re: *ORDERING* EBC Brake Pads & RDA Rotors
DP31614
Red Stuff Front Pads (ES, VR, VRX & RA)
Quoted @ A$120
DP61407
Green Stuff Rear Pads (VRX, OE, Aspire & RA)
Quoted @ A$75
VRX Front Grooved & Dimpled Rotors (Gold Anodised) (Pairs Priced)
RDA7896G
Quoted @ A$260
-------------------------
The above for me please ofey!
PM me your bank details when you want me to pay up.
DP31614+DP61407+RDA7896G = $455
Red Stuff Front Pads (ES, VR, VRX & RA)
Quoted @ A$120
DP61407
Green Stuff Rear Pads (VRX, OE, Aspire & RA)
Quoted @ A$75
VRX Front Grooved & Dimpled Rotors (Gold Anodised) (Pairs Priced)
RDA7896G
Quoted @ A$260
-------------------------
The above for me please ofey!
PM me your bank details when you want me to pay up.
DP31614+DP61407+RDA7896G = $455
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
If you think you're going broke, don't buy.
Buy it yourself from the shops outside of our group buy.
See if you go MORE broke!
If you're inevitably going to do these mods, do them with the group buys.
The Mitsubishi Parts from Preston can be done at any time. Put those off to the end.
Buy it yourself from the shops outside of our group buy.
See if you go MORE broke!
If you're inevitably going to do these mods, do them with the group buys.
The Mitsubishi Parts from Preston can be done at any time. Put those off to the end.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
I was going to just get pads but now I'm going all out muhahaha
(Should be the same as Ryan_C)
----
SIR-VRX (VRX) DA7896G + DP31614 + DP61407 = A$455.00
----
Thanks so much Ofey for the organisation of these awesome group buys you do! You are a dead set champion! PM Me when you want the money transferred.
Come on people! Let's get behind this!
(Should be the same as Ryan_C)
----
SIR-VRX (VRX) DA7896G + DP31614 + DP61407 = A$455.00
----
Thanks so much Ofey for the organisation of these awesome group buys you do! You are a dead set champion! PM Me when you want the money transferred.
Come on people! Let's get behind this!
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Thanks for the support.
We now have 4 orders. I guess they'll sell emm but the impression won't be good. We said group buy but it's more like an individual buy... .
I'm setting a deadline of Friday 25 July 2009.
We now have 4 orders. I guess they'll sell emm but the impression won't be good. We said group buy but it's more like an individual buy... .
I'm setting a deadline of Friday 25 July 2009.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 17 guests