***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* Russian Website Parts Auto-loker GB
Moderator: Senior Moderators
- vlad_the_impaler
- Lancer ES/EX
- Posts: 188
- Joined: Sun Mar 08, 2009 11:15 am
- Location: St Kilda East, VIC, Australia
Headlight illumination optics UPDATE!!!
Although I haven't received full installation DYI from Auto-locker they stated that their product is different than AutomoGLow one (AngelEyes) - it DOES NOT involve any backing! Just simple attachment of the led strip to the bumper and it's connected to low beam lights. As a result the strip "glows" and headlamp simply diffuses light.
I hope it makes sense... (apparently my technical knowledge in both english and russian is not so good LOL)
PS Just noticed that Nick (fisherr) already updated some info...
Although I haven't received full installation DYI from Auto-locker they stated that their product is different than AutomoGLow one (AngelEyes) - it DOES NOT involve any backing! Just simple attachment of the led strip to the bumper and it's connected to low beam lights. As a result the strip "glows" and headlamp simply diffuses light.
I hope it makes sense... (apparently my technical knowledge in both english and russian is not so good LOL)
PS Just noticed that Nick (fisherr) already updated some info...
Fisherrr wrote:lancervr wrote:hey vlad any info on the headlight illumination optics? do we need to bake our headlights to fit it inside the headlight housing?
HEAD LIGHT ILLUMINATION.
This is a LED waterproof strap which is placed beneath the headlamps and squeezed by them.
LED stRips are available from someone for $14. 20-25 at eBay.
THERE IS NO SENSE TO SOURCE THIS OPTION FROM AUTO-LOCKER.
vlad_the_impaler wrote:Headlight illumination optics UPDATE!!!
Although I haven't received full installation DYI from Auto-locker they stated that their product is different than AutomoGLow one (AngelEyes) - it DOES NOT involve any backing! Just simple attachment of the led strip to the bumper and it's connected to low beam lights. As a result the strip "glows" and headlamp simply diffuses light.
I hope it makes sense... (apparently my technical knowledge in both english and russian is not so good LOL)
PS Just noticed that Nick (fisherr) already updated some info...
Thanks guys! I must admit for such a simple process the result is quite impressive. I was going to get these but I guess I will take your advice and DIM (Do It Myself ).
EDIT: I just noticed I'm the only WA participant...again! It can be lonely over here
Last edited by Itachi on Thu Nov 04, 2010 9:42 pm, edited 1 time in total.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
EOI will close today.
For the benefit of all the newbies here,
Orders will be confirmed asap.
Payment request will follow with a PAY NOW in the title
Before it will be updated to PAID
Once the items are paid for, You will see a ORDERED.
Once supplier Dispatches, you will see a DISPATCHED
Once the receivers received you will see a DISTRIBUTING Stage
VIC
luffy4688 = DRL + Lighted Logo
twr75 = Lighted Logo X 2
R4PTOR = Central Lip (X42) + Rear Diffuser with Single Tip (X42)
Fisherrr = Front eyelids + Rear Eyelids + Rear Diffuser with Single Tip (W37) + Carpets + DRL + Bonnet Struts + Airdams(W37) + Central Lip (W37)
vlad_the_impaler = Front eyelids (A39) + Rear Eyelids (A39) + Airdams(A39) + Central Lip (A39)
rthieu = Front Lip (HOS Lookalike) (X42)
ofey = Lighted Logos X 2
NSW
liam92 = Side mount license plate (D06 or Black) + Lighted Logos X 2
SPRKLS = DRL (P26)
Chubb = Front eyelids (D06)
SAM-24A = Scuffplates (Lancer logo)
feral = Lighted Logo X 2
Mizta_B = Lighted Logo X 2 + Central Lip (P26)
ash06 = Central Lip
Bandit = Central Lip (W37)
foreshadow = Airdam + Central Lip + Rear Diffuser with Single Tip + Lighted Logo X 2 + DRL
BRO-027 = Bonnet Struts + Airdams(X42) + Rear Diffuser with Single Tip
bd-850 = Central Lip (Matte Black)
Chooks = front airdams (W37) + Central Lip (Matt Black) + Bonnet struts
Rear Diffuser with single tip (Matt Black)
goryee = Lighted Logo
QLD
draevon = DRL (A31)
Speedie = Side mount Licence Plate
AJjnr86 = Bonnet Struts + Front Lip Kit
Tarquin = Rear Roof Spoiler (X42) + Front eyelids (X42) + Rear Eyelids (X42)
Dean = Rear Diffuser with Single Tip (X42) + Front Lip (HOS Lookalike) (X42) + Evo X spoiler in X42 (black)
SA
Tenjho = Central Lip + Rear Diffuser with Single Tip
kean = Airdams(P26) + Central Lip (P26) + Front eyelids (P26)
WA
Itachi = Central Lip (Matte Black)
For the benefit of all the newbies here,
Orders will be confirmed asap.
Payment request will follow with a PAY NOW in the title
Before it will be updated to PAID
Once the items are paid for, You will see a ORDERED.
Once supplier Dispatches, you will see a DISPATCHED
Once the receivers received you will see a DISTRIBUTING Stage
VIC
luffy4688 = DRL + Lighted Logo
twr75 = Lighted Logo X 2
R4PTOR = Central Lip (X42) + Rear Diffuser with Single Tip (X42)
Fisherrr = Front eyelids + Rear Eyelids + Rear Diffuser with Single Tip (W37) + Carpets + DRL + Bonnet Struts + Airdams(W37) + Central Lip (W37)
vlad_the_impaler = Front eyelids (A39) + Rear Eyelids (A39) + Airdams(A39) + Central Lip (A39)
rthieu = Front Lip (HOS Lookalike) (X42)
ofey = Lighted Logos X 2
NSW
liam92 = Side mount license plate (D06 or Black) + Lighted Logos X 2
SPRKLS = DRL (P26)
Chubb = Front eyelids (D06)
SAM-24A = Scuffplates (Lancer logo)
feral = Lighted Logo X 2
Mizta_B = Lighted Logo X 2 + Central Lip (P26)
ash06 = Central Lip
Bandit = Central Lip (W37)
foreshadow = Airdam + Central Lip + Rear Diffuser with Single Tip + Lighted Logo X 2 + DRL
BRO-027 = Bonnet Struts + Airdams(X42) + Rear Diffuser with Single Tip
bd-850 = Central Lip (Matte Black)
Chooks = front airdams (W37) + Central Lip (Matt Black) + Bonnet struts
Rear Diffuser with single tip (Matt Black)
goryee = Lighted Logo
QLD
draevon = DRL (A31)
Speedie = Side mount Licence Plate
AJjnr86 = Bonnet Struts + Front Lip Kit
Tarquin = Rear Roof Spoiler (X42) + Front eyelids (X42) + Rear Eyelids (X42)
Dean = Rear Diffuser with Single Tip (X42) + Front Lip (HOS Lookalike) (X42) + Evo X spoiler in X42 (black)
SA
Tenjho = Central Lip + Rear Diffuser with Single Tip
kean = Airdams(P26) + Central Lip (P26) + Front eyelids (P26)
WA
Itachi = Central Lip (Matte Black)
Last edited by ofey on Wed Nov 10, 2010 7:54 am, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
UPDATE
The total cost of parts delivered will be in excess of A$5K. There's no way of hiding the cost or marking down. So we will have to pay GST and other freight costs since it will be a large delivery then onwards delivery from the one point.
1. Additionally, They will only deal at the prices they have provided if we deliver to 1 single location.
2. With Shadows now apprently responding to you. Could people first advise if they're going to proceed on their body parts order?
Freight Costs
fisherrr has prepared a simple spreadsheet showing the cost of each item. He has also divided the cost of shipping based on the cost of your item which I personally cannot agree with as shipping is charged volumetrically rather than cost. So those buying larger items are benefitting by others paying for their shipping. We will have to find a better way.
Firstly, I have removed all of the light illumination optics requests. It's senseless to buy.
I am also strongly of the opinion that parts you can get from our sponsor X-Factor such as the Evo X spoilers and airdams should be withdrawn.
Let's begin with the Russian's quoted price per piece. I figure if you're not even willing to pay this amount, there's no point continuing.
DRL = A$150
lighted logo = A$85
front central lip, painted = A$70
Rear Diffuser with Single Tip painted = A$195
Rear Diffuser with Single Tip matt black = A$135
Front eyelids painted = A$40
Rear Eyelids painted = A$55
Airdams painted = A$135
Side mount Licence Plate = A$20
Front Lip (HOS Lookalike) painted = A$200
Scuffplates, stainless steel = A$85
rear spoiler (sportback) painted = A$250
Evo style spoiler (100% matt black) = A$220
Evo style spoiler (painted outside , inside black) = A$300
The total cost of parts delivered will be in excess of A$5K. There's no way of hiding the cost or marking down. So we will have to pay GST and other freight costs since it will be a large delivery then onwards delivery from the one point.
1. Additionally, They will only deal at the prices they have provided if we deliver to 1 single location.
2. With Shadows now apprently responding to you. Could people first advise if they're going to proceed on their body parts order?
Freight Costs
fisherrr has prepared a simple spreadsheet showing the cost of each item. He has also divided the cost of shipping based on the cost of your item which I personally cannot agree with as shipping is charged volumetrically rather than cost. So those buying larger items are benefitting by others paying for their shipping. We will have to find a better way.
Firstly, I have removed all of the light illumination optics requests. It's senseless to buy.
I am also strongly of the opinion that parts you can get from our sponsor X-Factor such as the Evo X spoilers and airdams should be withdrawn.
Let's begin with the Russian's quoted price per piece. I figure if you're not even willing to pay this amount, there's no point continuing.
DRL = A$150
lighted logo = A$85
front central lip, painted = A$70
Rear Diffuser with Single Tip painted = A$195
Rear Diffuser with Single Tip matt black = A$135
Front eyelids painted = A$40
Rear Eyelids painted = A$55
Airdams painted = A$135
Side mount Licence Plate = A$20
Front Lip (HOS Lookalike) painted = A$200
Scuffplates, stainless steel = A$85
rear spoiler (sportback) painted = A$250
Evo style spoiler (100% matt black) = A$220
Evo style spoiler (painted outside , inside black) = A$300
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Still entirely keen, and again support shipping split volumetrically. Seems a bit ridiculous that shipping for DRLs should be 7.5x the cost of shipping a sidemount license plate holder.
.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.
- vlad_the_impaler
- Lancer ES/EX
- Posts: 188
- Joined: Sun Mar 08, 2009 11:15 am
- Location: St Kilda East, VIC, Australia
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 2 guests