***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Wed Jun 30, 2010 6:05 pm

Thanks Nathan I was looking for that for Michael earlier, but I was looking for a picture.

What would be great is if we could find who make the mats, as I am sure most would love to replace just the drivers side only. I dont know why we have to buy all 4 when the other 3 are still like new.

mikec
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Mar 03, 2009 8:21 pm
Location: Sydney, NSW, Australia

Postby mikec » Wed Jun 30, 2010 6:13 pm

Chubb wrote:Here you go michael from the first page in this post

kk)
MZ360243EX AUTO mats A$75.00
MZ360244EX MANUAL mats A$72.00

sigh* i went over the 1st post numerous time b4 and i didnt see it lol but i see it nows, thanks

mikec
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Mar 03, 2009 8:21 pm
Location: Sydney, NSW, Australia

Postby mikec » Wed Jun 30, 2010 6:14 pm

aspir3 wrote:Thanks Nathan I was looking for that for Michael earlier, but I was looking for a picture.

What would be great is if we could find who make the mats, as I am sure most would love to replace just the drivers side only. I dont know why we have to buy all 4 when the other 3 are still like new.

you got a point there mate lol i doubt were going to get it tho (manufacturer)
thanks for your help too mate

User avatar
Mr Bishi
INACTIVE Member Account
Posts: 21
Joined: Wed Jun 09, 2010 9:28 pm
Location: Brisbane (QLD) Australia

Postby Mr Bishi » Wed Jun 30, 2010 8:58 pm

I want to pick up a mitsu lancer fuel door...thing. The one with Lancer etched on it. Awesome.
Moonshiners put more time, energy, thought, and love into their cars than any racer ever will. Lose on the track, and you go home. Lose with a load of whiskey, and you go to jail. – Junior Johnson, NASCAR legend, and one time whiskey runner.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Jun 30, 2010 9:04 pm

Best to buy off eBay. Way cheaper.

PMR's best price to me is A$195. Then when I lump on shipping to you, it's silly.

Buy direct off eBAy, you should be able to get it delivered to you from USA for about A$165?
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Wed Jun 30, 2010 9:13 pm

mikec wrote:
aspir3 wrote:Thanks Nathan I was looking for that for Michael earlier, but I was looking for a picture.

What would be great is if we could find who make the mats, as I am sure most would love to replace just the drivers side only. I dont know why we have to buy all 4 when the other 3 are still like new.

you got a point there mate lol i doubt were going to get it tho (manufacturer)
thanks for your help too mate


Could get one made but by the time you match the colour then get it made, the cost would probably be the cost of the set, I think at this price if I was to order some I would buy two sets to future proof myself after Mitsu stop making them.

stafi
INACTIVE Member Account
Posts: 5
Joined: Mon Jun 28, 2010 3:21 pm
Location: Sydney

Postby stafi » Fri Jul 02, 2010 2:20 pm

ofey,
I would like to order some parts (reverse camera and ipod cable) but since I am a newbie i cannot pm you, is there any other way???

User avatar
DJBOOBY
Lancer ES/EX
Lancer ES/EX
Posts: 119
Joined: Sat Oct 03, 2009 8:10 pm
Location: Tumut NSW Australia

Postby DJBOOBY » Fri Jul 02, 2010 6:22 pm

after touch up paint 6-8 week wait with local dealer do you have in stock
cj lancer part number mz 103094 or fz/w37
thanks
PM sent
Image

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Fri Jul 16, 2010 10:33 pm

how easy is it to install the alloy fuel door

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jul 16, 2010 11:03 pm

Nothing is difficult. DO you realise that even if you didn't do it, someone else would be able to?

I've always approached life in that what one idiot could do, so could I ... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Fri Jul 16, 2010 11:13 pm

ok have you got them in stock so i can purchase one when i get my next pay day hopefully

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jul 16, 2010 11:18 pm

Mitch: I don't stock anything. I get them from PMR. Though my price is cheaper then what you can get.

However for this part, the cheapest way is to go through eBay.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Fri Jul 16, 2010 11:23 pm

i have been looking for these exact ones and cannpt find it yet and i wouldn't mind getting them of ya so i can meet ya to grap it off your hands because i dont want to pay for postage

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Fri Jul 16, 2010 11:27 pm

there are some on ebay for $153.77 and $59.54 postage so total $213.31

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Jul 17, 2010 6:31 am

The cheapest I've found on eBay is US$124+US$38.85post = A$187.11.

Granted this is only A$10 cheaper than PMR's price to me but it is cheaper. I don't want a disgruntled buyer.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 23 guests