***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
2012 Lancer Updates
Moderators: Moderators, Senior Moderators
So I emailed my dealer (Suttons Arncliffe) regarding possibly fitting the 2012 Lancer Reverse Camera in my 2010 Activ and here is the reply:
Hi Karl,
In regards to your query about the 2012 Lancer reverse camera we ourselves don't have a listing or any technical data yet in regards to the reverse camera setup,specifically whether they will be a factory order option or a dealer fitting scenario.
However I have checkked all options on the 2010 Lancer range and what we have listed is the reverse sensor kits only.
Regards,
Anthony Lasan
Spare parts
Suttons mitsubishi
Hi Karl,
In regards to your query about the 2012 Lancer reverse camera we ourselves don't have a listing or any technical data yet in regards to the reverse camera setup,specifically whether they will be a factory order option or a dealer fitting scenario.
However I have checkked all options on the 2010 Lancer range and what we have listed is the reverse sensor kits only.
Regards,
Anthony Lasan
Spare parts
Suttons mitsubishi
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Effect Grey is a tough colour to get right. I suspect Mitsubishi are moving to easier colours to mix.
And as for your reverse camera, you will need to give the parts department time to catch up.
And as for your reverse camera, you will need to give the parts department time to catch up.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Ofey.. exactly the same thing I told my wife about the camera but she wanted me to ask straightaway cause she is just a new driver.. she wouldn't let it go until I sent an email.
She doesn't know I bought her a new Fiesta and planning to give it on her birthday and I have to keep the facade going until then.
Thus the email
She doesn't know I bought her a new Fiesta and planning to give it on her birthday and I have to keep the facade going until then.
Thus the email
- ijustatecurry
- Lancer VRX/GTS
- Posts: 395
- Joined: Thu Jan 20, 2011 5:00 pm
- Location: Glen Waverley, VIC Australia
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I haven't had much time this week to comment about these developments.
The new wheel looks fugly IMHO.
The plan to give the VRX a RA front bumper bar? As lancervr pointed out early on in the piece, other markets have already seen this happen. So no surprise this would have happened.
Looking at what the VRX is now, I think it's MMA's way of staying competitive and to keep the CJ attractive just for the very end of the life cycle of this shape till the new shape shows itself in 2013.
Soft touch plastic? About time really... . Now I can't wait for the new Lancer.
Reverse parking mirror? They were simply meeting a safety requirement
I think the trim that gains the most is the VR. It is now a really interesting prospect. Saw a VR today with the boot release button. With Smart key already there, it's probably the only mod you cannot retrofit.
So best value sitting there.
The new wheel looks fugly IMHO.
The plan to give the VRX a RA front bumper bar? As lancervr pointed out early on in the piece, other markets have already seen this happen. So no surprise this would have happened.
Looking at what the VRX is now, I think it's MMA's way of staying competitive and to keep the CJ attractive just for the very end of the life cycle of this shape till the new shape shows itself in 2013.
Soft touch plastic? About time really... . Now I can't wait for the new Lancer.
Reverse parking mirror? They were simply meeting a safety requirement
I think the trim that gains the most is the VR. It is now a really interesting prospect. Saw a VR today with the boot release button. With Smart key already there, it's probably the only mod you cannot retrofit.
So best value sitting there.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Some collation of information from what I've heard:
- SX no longer available
but an ACTIVE model which is a souped up ES may come through again after the success of the last ACTIVE release.
All models will see:
- soft touch materials
- no more front tower strut bar
- wheels are from 10 spoke to 8 spokes
New colors range is:
White
Cool Silver
Black
Red
Lightening Blue
Orange
Titanium
Warm Silver
Production commenced Septmber 2011.
As I pick up more information, I will add in future posts.
- SX no longer available
but an ACTIVE model which is a souped up ES may come through again after the success of the last ACTIVE release.
All models will see:
- soft touch materials
- no more front tower strut bar
- wheels are from 10 spoke to 8 spokes
New colors range is:
White
Cool Silver
Black
Red
Lightening Blue
Orange
Titanium
Warm Silver
Production commenced Septmber 2011.
As I pick up more information, I will add in future posts.
Last edited by ofey on Fri Nov 04, 2011 2:59 pm, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
I don't think it affects suspension in any way. But it would affect the steering of the car.
So I suspect there will be some changes in the steering and suspension to come with the car.
We'll see.
So I suspect there will be some changes in the steering and suspension to come with the car.
We'll see.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Who is online
Users browsing this forum: No registered users and 19 guests