***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Creaking suspension

Everything Lancer Related + News & Current Affairs.

Moderators: Moderators, Senior Moderators

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Wed Apr 25, 2012 9:20 am

Mine creaks too, it's more noticeable since it was lowered.... :shock:
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Wed Apr 25, 2012 9:35 am

Polyurethane Bushes ..... :idea:

SuperPro Bushes

Available from:

Wholesale Suspension
129 Coreen Ave
Penrith NSW 2750
Ph: 4721 2112

1/24 Lidco St
Arndell Park NSW 2148
Ph: 9831 8825


Partco
6/88 Magower Rd
Girraween, NSW 2145
Ph: 9688 4400

Supercheap & Bursons Auto Stores.

Whiteline also make their own bushes similar to the Super Pro bushes.



Sam ..... *thumb*
Merlinised AspiRe 2.4L
Last edited by SAM-24A on Wed Apr 25, 2012 10:10 am, edited 1 time in total.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
ralliartrobbo
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Thu Dec 17, 2009 5:21 pm
Location: Canberra, Austtralia

Postby ralliartrobbo » Wed Apr 25, 2012 10:02 am

Wrong rubber bit. There is a rubber piece under the damping ajustment that is between the car frame and the aluminium top plate.

User avatar
big_d
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Fri Jun 18, 2010 9:00 am
Location: Wellington, New Zealand
Contact:

Postby big_d » Fri Aug 24, 2012 1:29 pm

WOOOHOOO!!!!!!
After over a year of trying to get this issue resolved, Mitsi finally nailed it!

Problem was...
Sway bar end links & bushes were faulty (just as others have found worldwide).


I'm stoked because Mitsubishi covered it under warranty even though my warranty ran out November 2011! Legands!

My car feels and sounds like new again! :D

User avatar
big_d
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Fri Jun 18, 2010 9:00 am
Location: Wellington, New Zealand
Contact:

Postby big_d » Fri Aug 31, 2012 9:06 am

If you have the same issue I had and you warranty is still valid - Take it straight to Mitsubishi and tell them how to fix the problem.

If your warranty has expired, here is how to fix the issue yourself (Thanks BR1AN for the video).
[youtube]http://youtube.com/watch?v=qtFKQUwLDjM[/youtube]

User avatar
big_d
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Fri Jun 18, 2010 9:00 am
Location: Wellington, New Zealand
Contact:

Postby big_d » Mon Sep 17, 2012 2:22 pm

If the car is under warranty or you are not DIY orientated then yes, take it straight to your local dealer as it is a known fault.

If your warranty has expired, it's a quick easy fix (as demonstrated in BR1AN's video).

User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:

Postby BR14AN » Mon Sep 17, 2012 4:46 pm

Good to see the videos helping :)

Chris and I redid this last weekend with lock nuts (basicly a nut with a plastic thread that holds it in place), needed to redo them after a few old pac runs and what not :P

So for anyone doing this in the future use some lock nuts, like $5.40 ish for a pack of 5 from Repco

User avatar
empror
Lancer VR/GT
Lancer VR/GT
Posts: 201
Joined: Wed Feb 15, 2012 10:35 am
Location: Kellyville, Australia

Postby empror » Mon Sep 17, 2012 6:22 pm

Yeah the locking nuts really worked a treat. which means my creaking might actually be my steering rack it seems :/

User avatar
cammag5
Lancer ES/EX
Lancer ES/EX
Posts: 169
Joined: Wed Jun 01, 2011 1:47 pm
Location: Brisbane, Australia

Postby cammag5 » Mon Sep 17, 2012 6:37 pm

mine is making the same noise and i used lock tight which worked a treat, but only for a week so will mitsu fix this under warranty if i have lowed springs?

User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:

Postby BR14AN » Mon Sep 17, 2012 10:46 pm

cammag5 wrote:mine is making the same noise and i used lock tight which worked a treat, but only for a week so will mitsu fix this under warranty if i have lowed springs?


As mentioned try once more with fresh (new) locking nuts :)

User avatar
BRE88N
Lancer ES/EX
Lancer ES/EX
Posts: 180
Joined: Mon Aug 08, 2011 9:12 pm
Location: nsw sydney

Postby BRE88N » Mon Sep 17, 2012 11:21 pm

thanks mate i have a look now

User avatar
evil.ralliart
Lancer Evolution
Lancer Evolution
Posts: 840
Joined: Tue Mar 29, 2011 7:18 pm
Location: Queensland

Postby evil.ralliart » Tue Sep 18, 2012 12:52 am

My front end makes the same noise ever since i had it lowered. I will look into the warranty work


Return to “ClubCJ Talk”

Who is online

Users browsing this forum: No registered users and 80 guests