***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

A bit of damage...

Everything Lancer Related + News & Current Affairs.

Moderators: Moderators, Senior Moderators

User avatar
Stalker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 352
Joined: Wed Apr 15, 2009 2:20 am
Location: Sunshine Coast, QLD, Australia
Contact:

A bit of damage...

Postby Stalker » Wed Oct 13, 2010 1:58 pm

Recently my Lancer came into a bit of damage while going through some road works. It sounds really stupid but it was night and i was going through some road works. There was little light and no one directing traffic. The cones lead you into the oncoming lane going into a T Intersection like so

Image

As you can see just off centre in that lane is an island. on that island is a keep left sign. I dont know how i didnt see it, it must have been in my A-Pillar or something but as soon as i started taking that bend, i saw it but it was too late. BANG!

shattered the front bumper and put a dent in my hood

Image

I parked my car down the next street and much to my surprise, when the traffic cop walked around the corner to meet me he pointed his finger at me and said "I know you". Turns out it was Simon, the cop who gave me a ticket for tailgating causing me to go on good behaviour and who since always seems to be around. He had a good laugh at the situation before taking down my details and letting me go, and not a moment too soon. It was 10:55 and i had 5 minutes to curfew.

So i hurried off home as quick as legally possible (my bumper scraping along the ground in the process)

I have since purchased a new bumper from Mitsubishi. When i rang up to get a quote on it they said it would be $590 unpainted. I decided to go for it and when i picked it up, it was factory painted wicked white! lucky!

i got some mates to help me install it and added a little something while i had the bumper off.

Image

note the protective bar ;)

and the end result

Image

I have also ordered some parts from ARS Bodykits. An Evo nose cone, evo side vents and this set of eyelids

Image

IMO the blue glow coming through the vents in the nose cone will look mad. I always take damage as a chance to upgrade. why only spend money getting it to look the way it did? might as well beef it up a bit :P

im also going to redo the chrome grill surround, and paint my engine cover blue with silver logo and MIVEC symbol.

next step though is to get the dent out of the hood. the paint is cracked pretty good so it will need a respray.
Image

User avatar
Quixand
Lancer VR/GT
Lancer VR/GT
Posts: 201
Joined: Fri Jun 18, 2010 11:39 pm
Location: Wolli Creek

Postby Quixand » Wed Oct 13, 2010 2:42 pm

With that blue light Simon can now definitely keep tabs on you :)

looks good, very nice upgrade.

User avatar
kinesis
Project Team Member
Posts: 778
Joined: Thu Nov 26, 2009 7:07 pm
Location: QLD, Australia

Postby kinesis » Wed Oct 13, 2010 8:52 pm

bummer about what happened. but glad that you've taken the opportunity to make some upgrades (and lucky about the bumper colour)

hope everything works out...take it easy mate
Blitz Air Filter | RPW Stage 1 ECU Flash Tune | UR Front Tower Strut Bar | UR Rear Lower Bar
Alpine iDA-X305 headunit | LED Taillights | VG Sharkfin Antenna

User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Postby exaltd » Wed Oct 13, 2010 11:33 pm

Interesting....

Lucky you. I think the primer from Mitsubishi is white in colour though? But a dull white (correct me if I'm wrong)? So I guess it could be wicked white painted :)

Nice to see you took the opportunity to upgrade :P But why no upgrade to RA front bar? ;)

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Oct 14, 2010 4:03 am

exaltd wrote:Nice to see you took the opportunity to upgrade :P But why no upgrade to RA front bar? ;)


The pricing difference between a RA front bar and a NA front bar is HUGE. Don't forget you can't reuse anything. So buy new fog lamps, new grills, the chrome surround, new stone trays and all.

Not cheap... .

The rear bar, that's a different story... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Stalker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 352
Joined: Wed Apr 15, 2009 2:20 am
Location: Sunshine Coast, QLD, Australia
Contact:

Postby Stalker » Thu Oct 14, 2010 7:14 am

Exactly. I had considered it but I don't have the money for an RA bar. I also considered having the centre bar painted gloss black instead of using vinyl again, but I decided on the Evo nose for the vent holes
Image


Return to “ClubCJ Talk”

Who is online

Users browsing this forum: No registered users and 25 guests