***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

LED or CCFL Angel Eyes?

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

LED or CCFL Angel Eyes?

Postby BrownSound » Wed Aug 03, 2011 6:22 pm

So I've been wanting angel eyes for quite a while now, never really taking the plunge and being distracted by other mods. Finally the time has come for me to actually go ahead and do it. The plan is to have it done by Concord Customs as I've decided I am not confident enough and do not really have the patience and finesse needed for the job.

The question is whether I should go for LED or CCFL?

The two main factors that worry me are brightness and longevity. I want the AEs to be visible during the day and it would be nice if they last since I don't really want to have to fork out more money to have new ones put in.

So, opinions anyone?

User avatar
13EZY
Lancer Legend
Lancer Legend
Posts: 1063
Joined: Sun Oct 24, 2010 7:50 am
Location: Brisbane, Oz

Postby 13EZY » Wed Aug 03, 2011 6:26 pm

been reasonably happy with the ones automoglow supplied although one has broken after about 6 months.
i also suuspect longevity has to do with ride comfort ie. stiff bouncy car like mine may knock em around a bit
"That's page 1, chapter 1 of the petrosexual handbook"
(Lord Clarkson - Series 17 Episode 1)
Image
Ride Of The Month June 2011

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Wed Aug 03, 2011 6:33 pm

Heh, I am planning on making my car more stiff with sway bars, although the pro kit springs offer quite a comfortable ride.

6 months? I guess for $80 AMG ones that is acceptable, I was thinking these would last closer to the 2 year mark, especially considering the cost including install is $450. I should probably discuss with the guys at Concord Customs if they have a "warranty" or anything.

User avatar
13EZY
Lancer Legend
Lancer Legend
Posts: 1063
Joined: Sun Oct 24, 2010 7:50 am
Location: Brisbane, Oz

Postby 13EZY » Wed Aug 03, 2011 6:41 pm

$450???? thats huge!
$100 delivered from automoglow, are CC charging you $350 for install?
"That's page 1, chapter 1 of the petrosexual handbook"

(Lord Clarkson - Series 17 Episode 1)

Image

Ride Of The Month June 2011

User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Wed Aug 03, 2011 6:58 pm

My Automoglow ones have lasted since May 2009 till now? So definitely more than 6 months for mine :D! They have the neon look which I like more than the LED ones but its ur own choice

User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Wed Aug 03, 2011 7:44 pm

450$ sounds a bit steep. I've also got the automoglow ones and ya couldn't be happier. I like the continuous ring of light and they're bright enough to see during the day.
Install is a bit of an ordeal but if your up for the challenge you could save a fair bit by the sounds of it.

User avatar
evolx08
Lancer Newbie
Lancer Newbie
Posts: 40
Joined: Sun May 29, 2011 3:13 pm
Location: Victoria

Postby evolx08 » Wed Aug 03, 2011 7:46 pm

^^ automoglow ccfl.. do these work on non projector headlights? has anyone done an install themselves? i'm trying to use the search button.. but i fail



nevermind i found it!

User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Wed Aug 03, 2011 7:53 pm

yup they fit on regular lancer headlights. I installed my set, takes maybe a few hours. There should be a how to on here but basics are take out headlights (need to take of front bumper) stick lights in oven to soften glue, open lights, glue in the ccfl tubes, seal it all back up and splice a few wires and your g2g

User avatar
evolx08
Lancer Newbie
Lancer Newbie
Posts: 40
Joined: Sun May 29, 2011 3:13 pm
Location: Victoria

Postby evolx08 » Wed Aug 03, 2011 8:05 pm

ok thanks. not sure how they would look on an evo.. maybe too much

User avatar
Glenn
Lancer Ralliart
Lancer Ralliart
Posts: 737
Joined: Fri Jan 21, 2011 9:54 am
Location: Brisbane Northside

Postby Glenn » Wed Aug 03, 2011 8:35 pm

depends how you wire it up. I've got mine wired up so they dim on and off when i unlock/open doors for a nice effect but then when driving they're off unless switched on. Didnt want to have too many lights/ricey look all the time so ya you can wire it up to suit.

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Wed Aug 03, 2011 10:40 pm

13EZY wrote:$450???? thats huge! $100 delivered from automoglow, are CC charging you $350 for install?


Yep, that is their standard price for installing AEs. I thought it was a bit much as well, but no-one else does it for any less and CC have done a lot of them (Hoges and Big_Lucas included).


Glenn wrote:450$ sounds a bit steep. Ive also got the automoglow ones and ya couldnt be happier. I like the continuous ring of light and theyre bright enough to see during the day. Install is a bit of an ordeal but if your up for the challenge you could save a fair bit by the sounds of it.


That's the question for me really, I don't thing I am up for the whole fiddly bit of gluing them in place right. But it really is a big difference in price.

User avatar
13EZY
Lancer Legend
Lancer Legend
Posts: 1063
Joined: Sun Oct 24, 2010 7:50 am
Location: Brisbane, Oz

Postby 13EZY » Thu Aug 04, 2011 8:45 am

i got mine wired up to parker lights btw
"That's page 1, chapter 1 of the petrosexual handbook"

(Lord Clarkson - Series 17 Episode 1)

Image

Ride Of The Month June 2011

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Thu Aug 04, 2011 9:04 am

I talked to CC a little while back about doing them for me. For an extra $100 I was going to get them to wire the AE to the parkers and the low beams - the AE turn on when parkers are on but off when the low beams are on (I was going to do this to extent their life as I do alot of long distance driving.

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Mon Aug 08, 2011 11:42 am

Wow... I just got off the phone with CC and in the last month they have changed their prices because they have gone with a new supplier. Supposedly due to the drama they were having with the old LEDs.

They now change $600 fitted!!

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Mon Aug 08, 2011 12:24 pm

Our vendor AutoMoGlow has CCFL on special fomr $100 to $80 and I think $15 shipping to AU.
How much will concord customs charge for labour?
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 66 guests