***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

replacement of front interior light bulb

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
vlad_the_impaler
Lancer ES/EX
Lancer ES/EX
Posts: 188
Joined: Sun Mar 08, 2009 11:15 am
Location: St Kilda East, VIC, Australia

replacement of front interior light bulb

Postby vlad_the_impaler » Wed Sep 29, 2010 6:51 pm

Does anyone know how to replace front interior lights? I think my front left bulb is dead...

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Wed Sep 29, 2010 6:55 pm

pop the cover off have a look at the bulb the go to a shop and buy either a replacement of the same type or a LED one of the same size. id presume it will be a festoon bulb in those front ones, i dont have them so i cant be sure.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
dannyboi
Lancer Evolution
Lancer Evolution
Posts: 818
Joined: Sat Jun 26, 2010 8:53 pm
Location: Sydney, Australia

Postby dannyboi » Wed Sep 29, 2010 7:02 pm

Look in the manual and they'll show you where to pop it off. A good idea is wrap your screwdriver or whatever with a cloth, to prevent scratches.

User avatar
vlad_the_impaler
Lancer ES/EX
Lancer ES/EX
Posts: 188
Joined: Sun Mar 08, 2009 11:15 am
Location: St Kilda East, VIC, Australia

Postby vlad_the_impaler » Wed Sep 29, 2010 7:20 pm

thanks Blake...
does the cover have any hidden screws or just clips?

User avatar
vlad_the_impaler
Lancer ES/EX
Lancer ES/EX
Posts: 188
Joined: Sun Mar 08, 2009 11:15 am
Location: St Kilda East, VIC, Australia

Postby vlad_the_impaler » Wed Sep 29, 2010 7:22 pm

aahh.. i see... ok thanks guys for help

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Wed Sep 29, 2010 9:41 pm

Just wrap a flat screwdriver tip in masking tape or fabric. The lens clips onto the fitting top and bottom towards the centre, kinda like a hinge. Just pop the top and bottom ones towards the centre and it comes out....
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Wed Sep 29, 2010 9:42 pm

it should just be clips for the diffuser, there should be a small notch, to put a flat blade screwdriver in to pop it out.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 32 guests