***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Help-tailight install

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
LuLu
Lancer ES/EX
Lancer ES/EX
Posts: 170
Joined: Mon Apr 08, 2013 4:51 pm
Location: Campbelltown

Help-tailight install

Postby LuLu » Sat May 04, 2013 9:42 pm

Hey guys
So today for my birthday my mates gave me a set of taillights (the rectangular ones)
Now I'm halfway trough the install and I'm stuck on the inner install
On the left side inner there's 2 wires tht branch into connectors and the wires are made u of red green and black wires
The right side inner has only 1 clump of wiring that's green red and black
Does anyone know what these wires are? An why the right side inner only has 1 clump? I assume black is ground...
Thanks guys :)

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Sat May 04, 2013 10:45 pm

i have installed two types of led lights and they are just plug and play , can u up load some pics ??? lulu :)
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

User avatar
Metalstrix
Post Monster
Post Monster
Posts: 2739
Joined: Thu Dec 13, 2012 4:16 pm
Location: Sydney Australia

Postby Metalstrix » Sat May 04, 2013 10:53 pm

yeah upload some pics so we can have a look :)

I used this as a guide

[youtube]http://www.youtube.com/watch?v=xUchSp1htp0[/youtube]

However, the video doesn't apply to all lancers
They will learn... I will always be a step ahead

No longer an active member.

User avatar
LuLu
Lancer ES/EX
Lancer ES/EX
Posts: 170
Joined: Mon Apr 08, 2013 4:51 pm
Location: Campbelltown

Postby LuLu » Sun May 05, 2013 12:35 am

Yeah I'll try and upload some pics soon
So I managed to chuck the lights in an all is good EXCEPT the left side reverse light doesn't not work at all... Everything else is fine, even the other reverse light but the left one does not work... Ideas?
Metalstrix wrote:yeah upload some pics so we can have a look :) I used this as a guide [youtube]http://www.youtube.com/watch?v=xUchSp1htp0[/youtube] However, the video doesnt apply to all lancers

Yeah used that video as a guide but my wiring had to be cut and harnesses removed cause they didn't fit so we manually matched everything
Correct me of I'm wrong but green is earth, red positive and black negative?

User avatar
LuLu
Lancer ES/EX
Lancer ES/EX
Posts: 170
Joined: Mon Apr 08, 2013 4:51 pm
Location: Campbelltown

Postby LuLu » Sun May 05, 2013 10:02 am

Yeah checked the bulb, it was fine :/
Thinking it may be connector wiring itself but I dunno tbh :(


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 58 guests