Hey guys,
i'm trying to figure out which line should i tap in for footwell lights to illuminate when the automatic headlights turn on...i tried looking in the service manual, but no luck in finding the right power line.
so basically i want red foot wells when the headlights are on. and off when the head lights are off.
any ideas guys?
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Footwell lights comes on when head lights turn on
Moderators: Moderators, Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Look under the coin holder just behind the gear shift You will find 2 sets of plugs.
You can tap some wires from there.
The plugs are for switches which light up when your head lights come on.
I think it's the Green and white wire from memory.
You can also tap from the ASC OFF switch on the right of the steering column.
You can tap some wires from there.
The plugs are for switches which light up when your head lights come on.
I think it's the Green and white wire from memory.
You can also tap from the ASC OFF switch on the right of the steering column.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Who is online
Users browsing this forum: No registered users and 38 guests