Find someone with small hands.
The high beams were a pain for me. I also scraped a bit of the silver reflector in the process.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
changing high beam globes help
Moderators: Moderators, Senior Moderators
-
BrownSound
- Lancer VRX/GTS
- Posts: 446
- Joined: Thu Feb 10, 2011 9:57 pm
- Location: Sydney, Australia
Yeah it was pain for me too... and I have relatively small hands.
I found that making sure that you unplug the wiring harness first and completely move the circular plastic cap out of the way give you a bite more room to play with. Also test fit and see which way the bulbs need to be aligned (there are 3 holes with 1 a different size to the others) and then check that all three 'male' ends are in before you twist.
You need a whole load of patience too...
I found that making sure that you unplug the wiring harness first and completely move the circular plastic cap out of the way give you a bite more room to play with. Also test fit and see which way the bulbs need to be aligned (there are 3 holes with 1 a different size to the others) and then check that all three 'male' ends are in before you twist.
You need a whole load of patience too...
Who is online
Users browsing this forum: No registered users and 88 guests