Background
A number of members have expressed interest in ClubCJ merchandise.
In response to this, the CCJ Committee of 2012 would like to invite product suggestions and designs through a competition.
Suggested items include: T-shirts, polo's, caps, hoodies (both zippered and pull over variants) and badges.
However what we're REALLY after are Logos and print designs!
In an attempt to keep production costs low, do keep the designs within 1 to 2 prints and 2-3 colours.
For design cues, perhaps the Ralliart merchandise catalogues can be consulted (2010) (2009).
Also for reference, here's a couple of designs, the Malaysian Lancer Club (lancerzoneGT) have already produced:
The designers of the adopted designs will be presented with a number of the completed merchandise courtesy of the club.
Also some products from our sponsors and Chief Buyer may find its way to you.
The decision on designs or judgement process will be made in due course but in the meantime, We look forward to seeing just how creative some of you are. So get your creative juices going and impress us all!
Disclaimer
Note that all designs if and when adopted will be intellectual property of ClubCJ.
A submission of any kind will assume that the designer is aware of this and relinquishes all claims on the IP of the design.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
ClubCJ Merchandising Design Competition
Moderators: Moderators, Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
ClubCJ Merchandising Design Competition
Last edited by ofey on Wed Mar 07, 2012 10:31 am, edited 2 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Oo! Yes I have a request!
When I had a skyline, SAU released these straw hats:
When they brought them out I thought "Why the hell would you want that?"
And ever since then, I always wish I had one It would be great when you're out and about in the sun (like on cruises, BBQs, trackdays), and something a bit different to just another cap.
Should be easy to get made too, as you only have to get the ClubCJ thing stamped on the ribbon.
When I had a skyline, SAU released these straw hats:
When they brought them out I thought "Why the hell would you want that?"
And ever since then, I always wish I had one It would be great when you're out and about in the sun (like on cruises, BBQs, trackdays), and something a bit different to just another cap.
Should be easy to get made too, as you only have to get the ClubCJ thing stamped on the ribbon.
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Just to mention, what we're looking for are really
LOGO DESIGNS
and
ART work
Suggestions of items are welcomed but those won't win you prizes nor enable our merchandising.
LOGO DESIGNS
and
ART work
Suggestions of items are welcomed but those won't win you prizes nor enable our merchandising.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Well I had these a while ago, but never had the time to really follow it up whilst in the Comm and one of our sponsors pulled out at the time too which could have produced my idea.
Here is a simple design idea for shirts I had for the club. Not sure if it's applicable for this comp but here it goes anyway
Background: It's a running joke that the guys in the club have that badges add KW's to a car. And the Ralliart one is such a prime example.
Here is a simple design idea for shirts I had for the club. Not sure if it's applicable for this comp but here it goes anyway
Background: It's a running joke that the guys in the club have that badges add KW's to a car. And the Ralliart one is such a prime example.
Sportback VR/GReddy Spectrum Elite/Advanti Medusa/K&N High-Flow Performance Panel Filter/Cusco Racing Braces
I like your idea Nick, but I would put the car in the centre and have a heap of small mods radiating from it
e.g. vinyl blackout, side mount plate, chrome trim, folding mirrors, angel eyes, DRLs, bodykit, Ralliart bonnet
Or you could do a side on view and bigger things like exhaust, headers, wheels etc.
e.g. vinyl blackout, side mount plate, chrome trim, folding mirrors, angel eyes, DRLs, bodykit, Ralliart bonnet
Or you could do a side on view and bigger things like exhaust, headers, wheels etc.
Ah yes, but this was a simple and clean design to get a simple funny running joke across and nothing more.
Plus it was made in a way to keep manufacturing costs down. (less colours, less complex pictures/patterns = less cost to make) and thus give members a nice cheap and funny T-shirt.
If you want to build on it yea, I like that idea! Like an exploded blueprint of additional mods etc with the car in the center.. Nice!
Plus it was made in a way to keep manufacturing costs down. (less colours, less complex pictures/patterns = less cost to make) and thus give members a nice cheap and funny T-shirt.
If you want to build on it yea, I like that idea! Like an exploded blueprint of additional mods etc with the car in the center.. Nice!
Sportback VR/GReddy Spectrum Elite/Advanti Medusa/K&N High-Flow Performance Panel Filter/Cusco Racing Braces
Terry if you were Draw your design on a piece of paper and scan or take a picture of it that would be acceptable.
EDIT: I will be uploading a series of Logo and template files that you can make use of to create your design. Also remember guys we have to consider copyright as we do intend to sell these products.
EDIT: I will be uploading a series of Logo and template files that you can make use of to create your design. Also remember guys we have to consider copyright as we do intend to sell these products.
Last edited by Chubb on Tue Mar 06, 2012 7:15 pm, edited 1 time in total.
Please feel free to download these files and use them to help create your own unique design.
(More to come as I create them)
Template Files:
Black T-Shirt
White T-Shirt
Black Hoodie
White Hoodie
Black Zipper Hoodie
White Zipper Hoodie
Cap
Logo Black
Logo White
Logo White Brief
Logo Black Brief
Logo White Brief Outline
Logo Black Brief Outline
(More to come as I create them)
Template Files:
Black T-Shirt
White T-Shirt
Black Hoodie
White Hoodie
Black Zipper Hoodie
White Zipper Hoodie
Cap
Logo Black
Logo White
Logo White Brief
Logo Black Brief
Logo White Brief Outline
Logo Black Brief Outline
Last edited by Chubb on Wed Mar 07, 2012 7:48 am, edited 8 times in total.
Who is online
Users browsing this forum: No registered users and 4 guests