ClubCJ - The CJ Lancer Club

Posted: **Mon Oct 10, 2011 1:20 pm**

Does anyone know of one available for the CJ? And, if anyone has done it an installation guide would be greatly appreciated

Posted: **Mon Oct 10, 2011 1:25 pm**

ive installed the push button start but it is only for the ralliart / evo dont know about the es but i reckon you can do it .

Posted: **Mon Oct 10, 2011 1:27 pm**

I have one fitted to my evo.
It was an option when I brought it.
you still have to turn the ignition on before you push the start button so I hardly ever use it.
It looks good and glows red but.

Cheers Brad.

Posted: **Mon Oct 10, 2011 1:40 pm**

Thanks guys, where did you get yours from Ken?

Posted: **Mon Oct 10, 2011 1:45 pm**

Engine Start Button

MZ360293 - Eng Start Button
RRP=A$450+
CCJ=A$425.00

ofey our cheif buyer can get this for you.

Posted: **Mon Oct 10, 2011 1:47 pm**

Awesome

Was it difficult to install? Any wiring troubles?

Posted: **Mon Oct 10, 2011 1:49 pm**

its all plug and play so to speak .

comes with factory instructions

Posted: **Mon Oct 10, 2011 1:51 pm**

If you happen to have the panels off in the future for any reason, reckon you could post a pic on here? I'm not a fan of playing with the wiring, it can be very easy to break stuff. So if it's plug n play, or simple, then it'll be an investment for me

Posted: **Mon Oct 10, 2011 2:01 pm**

your going to have some skills and confidence to do this or get someone else to help you do this . otherwise you might have a bit of trouble.

Posted: **Mon Oct 10, 2011 2:08 pm**

I have the skills, no problem with that. I just haven't seen the wiring before. Last time I did a start button was on a '96 camry, and it was much easier than the CJ (I can imagine)

Posted: **Thu Feb 16, 2012 9:49 pm**

Sorry to hijack this thread after a few months.. but is anyone aware if we can add a start/stop button.. and use it without putting the key into the "On" Position.. the only reason i ask.. is i have the smart key, so i don't need to physically insert the key, so if i can get a button would be so much better than turning the plastic thing..
Not sure if people here watch 'Mighty Car Mods' but they just recently did a show on installing the start/stop button.. however all they talk about is doing the two handed start (turn the key, then press the button).. in my opinion totally defeats the purpose of the button..
Any help would be appreciated

Posted: **Thu Feb 16, 2012 9:58 pm**

Yes it can be done. Uses the pedal instead of turning key. 200 series land cruiser prado has push button start and stop. If u push it without brake depressed....

1 push = accessories
2 push = ignition

Or with brake pushed
1 push = start car

Posted: **Fri Feb 17, 2012 8:58 am**

i don't mind doing the turn ignition push start any ideas on cost ?

Posted: **Fri Feb 17, 2012 9:51 am**

whitenight wrote:Engine Start Button [img:6e017b803b]http://www.clubcj.net/cached_images/1318218323.jpg[/img:6e017b803b] MZ360293 - Eng Start Button RRP=A$450+ CCJ=A$425.00 ofey our cheif buyer can get this for you.

$425 if you can get it through Ofey

ClubCJ - The CJ Lancer Club

Engine start/stop button

Engine start/stop button