***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
Help needed with foglight install
Moderators: Moderators, Senior Moderators
ok, cant say i have done one, but your idea sounds right do a button on the dash just to keep it clean, you could probably use that cable that runs into the fuse box and from what i hear the wiring looms dont change much at all so i believe you could and just find it in the fuse box than run it from there back to your dash for your switch, i wouldnt try and change the stalk it would be hell and not as cheap.... but its up to you, without seeing it tho i couldnt really be must help my friend sorry
-
- Lancer Evolution
- Posts: 824
- Joined: Mon Feb 14, 2011 3:58 pm
- Location: Adelaide
I can no longer see the ebay link.
however if they are OEM or genuine Mitsubishi Fog Lamps.
the following guide should be what you need...
https://docs.google.com/open?id=0B8y9I6 ... F9hblFvZmM
This is a scanned copy of the instructions including how to program the ecu to have fog lights. (you will need a MUT-III or go back dealer for this.)
however if they are OEM or genuine Mitsubishi Fog Lamps.
the following guide should be what you need...
https://docs.google.com/open?id=0B8y9I6 ... F9hblFvZmM
This is a scanned copy of the instructions including how to program the ecu to have fog lights. (you will need a MUT-III or go back dealer for this.)
-
- Lancer Evolution
- Posts: 824
- Joined: Mon Feb 14, 2011 3:58 pm
- Location: Adelaide
Who is online
Users browsing this forum: No registered users and 41 guests