***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Need some help with getting wire through

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
noodles
INACTIVE Member Account
Posts: 10
Joined: Tue Sep 01, 2009 1:48 am
Location: sydney aus

Need some help with getting wire through

Postby noodles » Wed Sep 02, 2009 5:19 pm

heya guys trying to get my fog lights done

trying to get this wire through here (only got about 10cm of the wire through)
Image

but i have no idea where the wire comes out from
can someone point out in this pic where its suppose to come out
Image

as u can see i pulled alot of stuff out....
is there an easier way of getting the wire through? some pointers would be very much appreciated

User avatar
noodles
INACTIVE Member Account
Posts: 10
Joined: Tue Sep 01, 2009 1:48 am
Location: sydney aus

Postby noodles » Thu Sep 03, 2009 1:16 am

can this be done with the wheel on?

lol getting lazy

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Thu Sep 03, 2009 1:29 am

matty with a bit of good advice there lolz,
take the wheel off, 2 second job.

haha your getting lazy!?
you just pulled half your dash apart lol,,

User avatar
noodles
INACTIVE Member Account
Posts: 10
Joined: Tue Sep 01, 2009 1:48 am
Location: sydney aus

Postby noodles » Thu Sep 03, 2009 1:45 am

i pulled everything apart and couldn't find the wire.....gave up
then had to put everything back in cause it was getting late and time for dinner with the missus

think i saw a black cable going down from the engine to the wheel well
i'll put my wire down with that black cable and back up into the cabin through another hole?
i'll take another look this weekend hopefully lol

thanks guys
will get back to you guys with some pics maybe lol

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Thu Sep 03, 2009 1:54 am

ok cool,
you should of asked first but nevermind...
you got to explore your car!! lolz.

it should be a piece of cake now.!!!!!

User avatar
noodles
INACTIVE Member Account
Posts: 10
Joined: Tue Sep 01, 2009 1:48 am
Location: sydney aus

Postby noodles » Thu Sep 03, 2009 2:08 am

piece of cake? lets hope so lol

whats the law with LED under the car body?
was thinking about putting some LED under the car
illegal while driving?

arc
INACTIVE Member Account
Posts: 21
Joined: Sun Oct 12, 2008 8:26 pm
Location: Brisbane, QLD, Australia

Postby arc » Tue Oct 20, 2009 5:24 pm

Remove the panel above your pedals then stick your head up you will see a gromet about the size of 5 - 10 cent coin use that you may need to lift the foam padding back to see it. I feed all my alarm wires through there.


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 12 guests