Page 1 of 1
Auto folding mirror installation
Posted: Thu Feb 13, 2014 12:52 pm
by jordan.fuchs
Hey guys,
I bought a set of OEM Auto Folding mirrors from a wrecker yesterday, got them installed fine (plugged original wiring harness into the new mirrors) put the switch in and enabled the Folding Mirrors in the ETACS but the mirrors don't fold. I can adjust the mirrors fine, but they won't fold.
The wrecker (Younis) assures me that he bench tested the mirrors and they definitely worked, he was as stumped as I was.
Any suggestions?
Posted: Thu Feb 13, 2014 1:29 pm
by jordan.fuchs
Yeah mate, put the different switch in there but no go, I'll pull it out over the weekend to see if a pin is missing or something. Younis is tracking down the original wiring loom that came with the mirrors (from the donor car) and he said he'd chuck that it for me.
Posted: Thu Feb 13, 2014 3:10 pm
by JustinR
Could it be an ECU thing? (Wouldn't know just asking)
Posted: Thu Feb 13, 2014 3:12 pm
by jordan.fuchs
Don't think so.. I enabled the folding mirrors function in the ETACS but that didn't seem to do anything..
Posted: Thu Feb 13, 2014 4:01 pm
by OldEmmGee
As well as the wiring differences, there are two relays in the ETCS that control the folding function (probably not fitted in your vehicle). I am doing a bit of investigating now.....but looks complicated ;-(
Posted: Thu Feb 13, 2014 4:02 pm
by jordan.fuchs
Hm.. bugger, let me know how you go and what you find, I really wanna get this working!
Thanks heaps!
Posted: Thu Feb 13, 2014 4:15 pm
by OldEmmGee
The power is shared with the door locking/unlocking so if this is working a missing fuse is not the problem. Can you hear any light 'clicking' when you operate the fold/unfold coming from the ETACS (the white fusebox behind the glovebox)?
Posted: Thu Feb 13, 2014 4:20 pm
by jordan.fuchs
From memory, no but I will check when I get to the car.
Cheers for the help mate much appreciated.
Posted: Thu Feb 13, 2014 4:34 pm
by OldEmmGee
OK - I've checked out the wiring - assuming it is a 13MY LX as per your signature...
Looking at the ETACS, top left connector (15-way with a sodding great wire in the middle) there should be a Silver/Black wire and a Blue wire on the lower part (next to the sodding great wire). These are the two wires connected to both power mirror motors (voltage one way round tor close, the other way for open). Above the Silver/Black is a Blue/Green.
Check you have these wires connected (and then stick a test light or multimeter on these for function check).
Hope this helps!
Posted: Thu Feb 13, 2014 4:41 pm
by jordan.fuchs
You're a legend. I'll check when I get home.
Posted: Tue Apr 01, 2014 1:12 pm
by debonaire
Are they just not folding on locking the doors, i.e can you electrically fold them with the button on the door?