I would like to be able to unlock the drivers door only when entering my Lancer CJ VRX, rather than unlocking all doors, for better security.
The only posting I have found on the topic was at:
http://www.mitsubishi-forums.com/t48751-couple-q39s-about-info-screen-and-how-to-set-how-doors-unlock.htm
The instructions provided at the above forum were:
Ok, I got it to switch, it's really goofy. Just note that it's easy to accidentally change other settings you didn't intend to change while attempting this. I accidentally changed my horn sounding or not sounding setting for the alarm. I actually like how it is now, if I press the lock button on the remote the horn sounds as the doors lock. Before I had to press lock twice to get the horn to sound.
But anyway here's how I changed the unlock setting:
Stand near the drivers door, hold down the lock button on the remote and count: 1-1000, 2-1000, 3-1000, 4-1000, 5-1000, 6-1000 -- on 6 press the unlock button while still pressing the lock button (so both at the same time) and continue counting: 7-1000, 8-1000, on 8 release the lock button (but keep holding the unlock), and count 9-1000, on 9 release the unlock button. You should then hear a very, very, very faint chime sound. (its real hard to hear, so be in a quiet area and listen close). If you hear one chime, the setting will be set to unlock all doors at once.
If you release the button in the opposite order, unlock first, then lock, you will hear two chimes and the setting will be set to unlock drivers door only.
(note: if you hear 4 chimes you've changed your horn setting or if you release in the wrong order and your current setting is unlock drivers only, you'll hear two chimes which means you changed the horn setting)
I live in the country so I don't need the security feature either, so I set mine to unlock all.
Hope this helps.
Several people in the USA say they have tried the above and it worked fine. However, I have tried many times on my CJ with no luck.
Has anyone in Australia been able to use the above method successfully?
Does anyone know of a method that works on Australian CJ Lancers?
Thanks everyone.