***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

DR550GW-2ch Issue!

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
jordan.fuchs
Lancer Ralliart
Lancer Ralliart
Posts: 705
Joined: Mon Feb 11, 2013 1:00 pm

DR550GW-2ch Issue!

Postby jordan.fuchs » Sun Jan 19, 2014 6:01 pm

Hi All who were involved with the most recent dash cam group buy,

Noticed your central locking not working as it used to?

It looks like there is an issue with the Coaxial cable that connects the rear camera to the front camera, it looks like it is putting out an electromagnetic field that is interfering with the remote.

I have been in contact with Pittasoft to see if I can get some information regarding this but while I wait for their response, I have disconnected the rear camera.

If anyone has any suggestions on how to block this EMF I'm up for suggestions.

User avatar
Tweak
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 459
Joined: Sun Nov 14, 2010 6:11 am
Location: Australia

Postby Tweak » Sun Jan 19, 2014 6:05 pm

Get a decent cable that's magnetically shielded. Sounds like that skimmed on the cable and got some cheap and nasty shit.

No real fix other then getting a better quality cable

User avatar
jordan.fuchs
Lancer Ralliart
Lancer Ralliart
Posts: 705
Joined: Mon Feb 11, 2013 1:00 pm

Postby jordan.fuchs » Sun Jan 19, 2014 6:06 pm

From my understanding the coaxial cable for the rear camera also supplies power, so not really a standard coax. cable I don't think.

User avatar
Tweak
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 459
Joined: Sun Nov 14, 2010 6:11 am
Location: Australia

Postby Tweak » Sun Jan 19, 2014 6:10 pm

can u run the power supply separately.
Sounds like a cheap cable. Id remove it and go to Jaycar and see what they can come up with

User avatar
jordan.fuchs
Lancer Ralliart
Lancer Ralliart
Posts: 705
Joined: Mon Feb 11, 2013 1:00 pm

Postby jordan.fuchs » Sun Jan 19, 2014 6:12 pm

Tweak wrote:can u run the power supply separately. Sounds like a cheap cable. Id remove it and go to Jaycar and see what they can come up with


Nope, rear camera only has one connection point.

User avatar
Tweak
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 459
Joined: Sun Nov 14, 2010 6:11 am
Location: Australia

Postby Tweak » Sun Jan 19, 2014 6:16 pm

either wrap it in alfoil or get some Aluminum tape from a Refrigeration shop and tape the entire cable. I have a roll here id let ya use but ur in nsw

User avatar
jordan.fuchs
Lancer Ralliart
Lancer Ralliart
Posts: 705
Joined: Mon Feb 11, 2013 1:00 pm

Postby jordan.fuchs » Mon Jan 20, 2014 8:17 am

Thanks for the suggestions Brendan, running a lower guage cable isnt really an option though, don't wanna affect the bandwidth of the cable.

User avatar
lunga
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Thu Nov 10, 2011 2:21 pm
Location: Melb, Australia

Postby lunga » Sun Jun 08, 2014 10:03 pm

Hey jordan, I have just installed my DR550GW-2ch a few weeks back and it runs fine??

I ran the cable from the rear camera via the headliner > C pillar > door sill > B pillar > door sill > down the A pillar, where I did a service loop (behind the glove box) then back up the A pillar > front headliner to the front camera.

This was all done on the passenger's side.


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 37 guests