Hi,
I has anybody found dash switches to replace the blank ones they currently have. (There is currently one which says ASC OFF but there are two others which are blank).
I want to connect some LEDs to it. A 3 way switch would be best (ON-OFF-DOOR), but i will settle for a simple OFF-DOOR switch.
Where can i get them?
Im thinking wreckers and pull out an old ASC OFF switch and just rub the text off it.
Cheers
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
LED SWITCH
Moderators: Moderators, Senior Moderators
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
And furthermore you can't "rub off" the words ASC. If you note carefully, they light up in the night. It's actually translucent plastic which allows the light from the LED behind it through... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
hey Sam... i have been thinking about sumthing like that but i am not to sure how the wiring would work... i have been searching through ebay and found something like this
http://cgi.ebay.com.au/AIRCRAFT-ON-OFF- ... ccessories
hope that is something close to what u are looking for
http://cgi.ebay.com.au/AIRCRAFT-ON-OFF- ... ccessories
hope that is something close to what u are looking for
this is what ithink would looks like even though i dunno if it will work since i am not that good with electric...
the switch is just a on-off toggle switch like the one i showed in the reply above me...
when the switch is off the led strip will turn on when the doors are opened and when the switch is on, the led strip will turn on without the door being opened....
would someone correct me if this is right or wrong ?
cheers Tim
the switch is just a on-off toggle switch like the one i showed in the reply above me...
when the switch is off the led strip will turn on when the doors are opened and when the switch is on, the led strip will turn on without the door being opened....
would someone correct me if this is right or wrong ?
cheers Tim
These are a similar item from Jaycar but in CF
http://www.jaycar.com.au/ShowLargephoto ... nce&IMAGE=
They will go over Jaycar's heavy duty 12mm switches. If you wanted matching switches you could try getting a blank cover from Mits or a wreker and adding a heavy duty switch and CF missle cover for the existing ASC OFF button and then do the same for any other switches you want to fit.
http://www.jaycar.com.au/ShowLargephoto ... nce&IMAGE=
They will go over Jaycar's heavy duty 12mm switches. If you wanted matching switches you could try getting a blank cover from Mits or a wreker and adding a heavy duty switch and CF missle cover for the existing ASC OFF button and then do the same for any other switches you want to fit.
Who is online
Users browsing this forum: Google [Bot] and 15 guests