ClubCJ - The CJ Lancer Club

maybe double what you just mentioned or more..

It's more like $800-$1000

You will need the following:

- Front bar Cover
- Upper and Lower Centre Grilles
- Fog Lamp Grilles
- Chrome Garnish

This is a dealer we are talking about. Practically it would be about $800, so that means it will cost you around $1500 from them. I would actually consider changing my whole front for a VRX (black preferably), but would have a hard time selling the car for a decent price later. Keep us up to date with how much they quote.

Anyone aware if the Ralliart Rear bumper fits onto a ES/VR/VRX lancer?
Had someone scratch my rear bumper up in a parking lot. & hoping i can get it replaced with one of these. Is that even possible?

Yes it fits fine. A few have had it done, most recently is ofey.

the RA bumper will fit but i think you need to modify your exhaust since the RA exhaust outlet sits further in than the es/vr/vrx exhaust..

SIR-VRX wrote:Yes it fits fine. A few have had it done, most recently is ofey.

Cool, is there any photos of it??? I only look at the threads I care about, so don't always see off topic things in other threads.

Thought you meant grille, not bumper. Didn't read properly.

sounds good then,
ofey post some pics up asap plz!

on a further note* am i able to have my bumper replaced with a Ralliart rear? the left of mine is scratched up now, i'd hate if they just resrayed it, is there anyway i can get this bumper through insurance?

ash06 wrote:sounds good then,
ofey post some pics up asap plz!

on a further note* am i able to have my bumper replaced with a Ralliart rear? the left of mine is scratched up now, i'd hate if they just resrayed it, is there anyway i can get this bumper through insurance?

Don't know, none of us are your insurer!

He has kept it pretty quiet, so the only pic is in this: Linky

He also got the OEM RA rear muffler fitted up, but it had to be modified to not only meet up with the stock exhaust but had to be made lower too, as the boot floor of the RA is higher to fir this muffler.

Superintendent Chalmers wrote:

ash06 wrote:sounds good then,
ofey post some pics up asap plz!

on a further note* am i able to have my bumper replaced with a Ralliart rear? the left of mine is scratched up now, i'd hate if they just resrayed it, is there anyway i can get this bumper through insurance?

Don't know, none of us are your insurer!

haha, and oh how i wish someone on this club were.
All the free parts i would get!

Heres a picture of ofey's car with the RA rear bumper. He also got an OEM RA Exhaust aswell....

Doing a Blakey Tadz... Posting without reading the other posts in the thread

I've already linked a picture and explained it

I can solve this for you boys easy. My exhaust guy cracked my front center lip which I have still yet to replace due to time constraints so I asked PMR to do a quote for the RA front. I was quoted by PMR about A$1,500.00 for the parts necessary. The fog lamp part is A$400 so I'd say you'd be looking at about A$1,200.00.

You could also remove the radiator cover i.e. that plastic thing that has the air flow guide, that knocks off a further A$100 odd?

RRP is about A$2,000.00.

ofey wrote:I can solve this for you boys easy. My exhaust guy cracked my front center lip which I have still yet to replace due to time constraints so I asked PMR to do a quote for the RA front. I was quoted by PMR about A$1,500.00 for the parts necessary. The fog lamp part is A$400 so I'd say you'd be looking at about A$1,200.00.

You could also remove the radiator cover i.e. that plastic thing that has the air flow guide, that knocks off a further A$100 odd?

RRP is about A$2,000.00.

Did that include any kind of trade in for your old one, or would you be able to sell that to someone else privately???

Also, can you just buy the PMR side skirts (the ones on the PMR pimped out ES cars) on their own or do you need to buy the whole PMR set of bodykit??