***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

X-factor Evo X rear spoiler

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
BMM
INACTIVE Member Account
Posts: 12
Joined: Tue Jan 19, 2010 2:16 pm
Location: Perth Australia

X-factor Evo X rear spoiler

Postby BMM » Mon Jan 25, 2010 3:32 pm

The rear spoiler on our RX has a snaped off bolt and was going to get the dealer to replace the spoiler with a new one but Ilike the look of the Evo X one.
Question is do these fit the same bolt holes as the standard spoiler and do the fit on a RX Lancer.

Cheers
Millsy
User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon Jan 25, 2010 3:47 pm

I think from memory 1hole lines up each side, the others need to be drilled...
User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Mon Jan 25, 2010 7:04 pm

The front and back holes need to be drilled as far as I'm aware, there are 3 holes in total.

If you open the boot they are outlined in a circle so you'll notice it, you could just plug/silicone up the hole that the RX spoiler used and drill a third hole for the evo spoiler.
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 69 guests