***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Rhino Lip - anyone tried it?

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Rhino Lip - anyone tried it?

Postby Zaphod » Thu Jan 23, 2014 8:37 pm

Hi All!

Anyone tried using Rhino Lip? - I've got a MY2014 ES and I was originally going to put on a pair of VRX 'pods' on the bottom of the front bar, but I'm going off the idea as they look a bit 'obvious'...

I saw the EZ-Lip and after a bit of a dig around it appears it's too soft to stand any wear - the Rhino Lip is stiffer and apparently can be painted - I was wondering if anyone has any first-hand experience with it.

Just FYR, this is what the bottom of my ES looks like - it's kinda 'half-podded' already:


Image


Cheers!
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image

User avatar
citris.87
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 488
Joined: Mon May 06, 2013 2:09 pm
Location: Townsville

Postby citris.87 » Thu Jan 23, 2014 9:04 pm

All of those quick universal lip kits are just weather stripping form a garage door and some double sided tape, they have actually been around for a while. If you wanted to go this path you can get them from burnings for a LOT cheaper, you just need to look for one with the right shape for what you need.

I notice a few of them say you can paint them, I don't know how hold they would hold up, they are stiffer yes, but they are still flexible because they have to be in order for them to be universal. If you wanted something you want to paint, you are better off getting a proper lip.

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Thu Jan 23, 2014 9:22 pm

Can't get a lip/splitter to suit mine... only for pre-2012!

I know what you mean about the rubber door seal, but the Rhino Lip is altogether different - have a look at this:

http://www.youtube.com/watch?v=qxhHastUvBU

Cheers!
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Thu Jan 23, 2014 9:26 pm

Zaphod wrote:Cant get a lip/splitter to suit mine... only for pre-2012! I know what you mean about the rubber door seal, but the Rhino Lip is altogether different - have a look at this: http://www.youtube.com/watch?v=qxhHastUvBU Cheers!
i went to clark rubber and did my own lol
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Thu Jan 23, 2014 10:23 pm

Yeah, Clark Rubber have saved me with a few 'weird' jobs in the past...!

:-)
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image

User avatar
citris.87
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 488
Joined: Mon May 06, 2013 2:09 pm
Location: Townsville

Postby citris.87 » Thu Jan 23, 2014 10:29 pm

Looking at that video, you can tell by the shape that it's still a form of weather stripping. They come in all types, some are a foam rubber, some stiff rubber and some a very stiff plastic.

User avatar
geh12
Lancer ES/EX
Lancer ES/EX
Posts: 108
Joined: Wed Jan 30, 2013 12:00 am
Location: Perth City, Australia

Postby geh12 » Thu Jan 23, 2014 11:47 pm

I have installed a Rhino Lip on my CJ back in the Philippines, though haven't seen an actual EZ-Lip, but so far the Rhino is indeed stiff and flexible.. I dont know about painting it if how it will look, but I'm satisfied on how it turns out on my CJ.. It came practical for me compared to a more expensive lip..

See my CJ below..

Image

User avatar
Sammy
Lancer Newbie
Lancer Newbie
Posts: 86
Joined: Sat Jan 04, 2014 9:13 am
Location: Melbourne

Postby Sammy » Thu Jan 23, 2014 11:54 pm

sorry to derail the thread a little martin but if anyone has tried fitting one of these with the vrx pods i would be very interested to see a photo of how it looks because im not keen on buying one to find out it looks terrible with the vrx style front bar
Image
2010 2.4L lancer aspire

User avatar
geh12
Lancer ES/EX
Lancer ES/EX
Posts: 108
Joined: Wed Jan 30, 2013 12:00 am
Location: Perth City, Australia

Postby geh12 » Fri Jan 24, 2014 12:01 am

This might help..

Image

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Fri Jan 24, 2014 6:27 am

Don't know if your car could have the vrx attachments added anyway as your lancer has the RA style bumper 2013 models get

User avatar
Kal777
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 404
Joined: Mon May 21, 2012 9:48 pm
Location: Adelaide

Postby Kal777 » Fri Jan 24, 2014 6:48 am

Not all 2013 models get a RA bumper, dont know how people started to think they do? My 2013 doesnt have a RA bumper and neither does Martins. Mitsubishi are making a run of base lancers with RA body kits but they are all the CVT models i believe.
Image
Injen Cold Air Intake/K&N Invert Pod/BC BR Coilovers/Whiteline Strut Brace/DrIft Blade seats/Penrite HPR5/Penrite ProGear/PBR Gold Dot

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Fri Jan 24, 2014 7:19 am

Kal777 wrote:Not all 2013 models get a RA bumper, dont know how people started to think they do? My 2013 doesnt have a RA bumper and neither does Martins. Mitsubishi are making a run of base lancers with RA body kits but they are all the CVT models i believe.


My mistake thought it was now standard kit

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Fri Jan 24, 2014 8:12 am

i like the ezlip/rhino lip it looks good on alot of cars espcially the mazdas. but because the lancers have a very rounded lower front bar it looks very plain
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Fri Jan 24, 2014 8:17 am

@kirtis: - thanks for that, I'll have to swing past Bunnings and have a look...

@christian - thanks for the photos - nice-looking car! :-)

@sam: - I figured I'd put it on as the VRX 'pods' may not work - I'll post pics when I get it done

@kalum: - I hear ya! - it's a bit of a pain with the later models, but you just gotta be creative!

@Akram: - same!

@chris: - agree!

Thanks everyone!

:-D
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Postby chunky9 » Fri Jan 24, 2014 9:28 am

It doesn't look half bad on the ralliart lol


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 86 guests