***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Air Dam MEASUREMENTS!

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Air Dam MEASUREMENTS!

Postby Carl-BVI » Sun Aug 19, 2012 5:43 pm

Just wondering if someone with Air Dams can Measure for me the Width of the air dam (So from top to bottom)

I have ordered a pair from mitsu and planning to put the vlip on aswell but my car has king springs so worried about how low it will be!

Thanks !

-Carlos
User avatar
Edmi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 420
Joined: Sun Sep 18, 2011 1:17 pm
Location: Melbourne

Postby Edmi » Sun Aug 19, 2012 6:10 pm

i was measuring mine today as i am about to do the same thing. it was roughly 4-4.5inches
User avatar
Bags
Lancer Newbie
Lancer Newbie
Posts: 78
Joined: Sat Aug 20, 2011 2:18 pm
Location: Melbourne

Postby Bags » Sun Aug 19, 2012 6:29 pm

G'day mate, I had kings and now its lower with coilovers and I have not hit a thing. Just be smart and drive appropriately for large driveway entries etc. go slow with a good angle and you will be sweet.
User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Sun Aug 19, 2012 7:09 pm

Hi Carl , I Just measured my Air-Dams for you & From top to bottom is roughly 8.5 cm & I have the King Springs as well & I measured from the bottom of the Air-Dam to the ground and It is roughly 13 cm & I must admit as careful as I try to be I have had a couple of scrapes ...


Image
Image
Angels Are Sometimes Disguised As Friends
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Postby Carl-BVI » Mon Aug 20, 2012 5:16 pm

G'day mate, I had kings and now its lower with coilovers and I have not hit a thing. Just be smart and drive appropriately for large driveway entries etc. go slow with a good angle and you will be sweet.

Thanks mate! feel better! ONLY thing is i want to also add the Vlip aswell. hope that leaves a bit to. BUT if anything it will protect the Air dams i suppose!


Hi Carl , I Just measured my Air-Dams for you & From top to bottom is roughly 8.5 cm & I have the King Springs as well & I measured from the bottom of the Air-Dam to the ground and It is roughly 13 cm & I must admit as careful as I try to be I have had a couple of scrapes ...

Ahhh i see! Do you think there would be enough room to add a Vlip?
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Postby Carl-BVI » Mon Aug 20, 2012 5:17 pm

i was measuring mine today as i am about to do the same thing. it was roughly 4-4.5inches


Is your ride lowered mate? when are you expecting your lip?
Let me know how you go with clearance etc when you get it on :)
User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Mon Aug 20, 2012 8:32 pm

I have coilovers and mine are fine... :)
Only reason you should worry is if you have an awkward driveway or frequent an annoying carpark.

And those measurements aren't really helpful as most of the airdam is level with the the bumper, it only sticks down a tiny bit (1-2cm maybe)?
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Postby Carl-BVI » Mon Aug 20, 2012 8:37 pm

And those measurements aren't really helpful as most of the airdam is level with the the bumper, it only sticks down a tiny bit (1-2cm maybe)?


Well if thats true i shouldn't worry at all then!
Thanks mate :)
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 28 guests