***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

INTAKE SCREW HELP!

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

INTAKE SCREW HELP!

Postby Carl-BVI » Tue Aug 07, 2012 7:03 pm

Im having trouble removing the Two screws that attach to front of the intake, No matter how much i turn left or right nothing happens, it looks like some sort of Clips around the screws, Is there a trick to them i just didnt want to break them :)

Thanks heaps!
User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Tue Aug 07, 2012 7:05 pm

get a small flat blade screw driver under the head of the screw, then as you unscrew with one hand use the other to pry the head up with the flat blade.

once you have them out replace them with some Xmas tree clips, they are like $5 for 4 at Repco and super cheap
bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Tue Aug 07, 2012 7:05 pm

pull up, not a screw, its a "christmas tree" clip
User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Tue Aug 07, 2012 7:06 pm

nope on the intake itself Ben they do have a thread.
bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Tue Aug 07, 2012 7:08 pm

my bad
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Postby Carl-BVI » Tue Aug 07, 2012 7:30 pm

Awww okay i think i understand, What is the reason of replacing them? are they one use only or? Never used Xmas tree Clips before either? are they reusuable?
User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Tue Aug 07, 2012 8:00 pm

the reason to replace is because they are a pain to use. I have xmas clips on mine and I have reused mine many times. To give you an idea I remove my intake everytime I was the car (engine bay airbrushing) and I have used the same two clips for almost 3 years.
User avatar
Carl-BVI
Lancer ES/EX
Lancer ES/EX
Posts: 176
Joined: Sat Nov 26, 2011 2:41 pm
Location: NSW, Wollongong

Postby Carl-BVI » Tue Aug 07, 2012 8:02 pm

the reason to replace is because they are a pain to use. I have xmas clips on mine and I have reused mine many times. To give you an idea I remove my intake everytime I was the car (engine bay airbrushing) and I have used the same two clips for almost 3 years.


AHHH i see, thanks heaps for the help mate, Great TIP!
User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Tue Aug 07, 2012 9:42 pm

If you plan to replace them then you can get them out by pushing them from underneath as well (will probably ruin their thread though).
They're kinda sharp though so don't use a finger :P
User avatar
Tac89
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 394
Joined: Mon Feb 28, 2011 6:46 pm
Location: Adelaide

Postby Tac89 » Tue Aug 07, 2012 9:51 pm

If you get your hand underneath and squeeze the 4 prongs together and screw it out at the same time that works, did for me any way. Doesn't ruin the thread either.
User avatar
lukeaday
Club Sponsor
Club Sponsor
Posts: 781
Joined: Sun Sep 06, 2009 5:23 pm
Location: Melbourne, Australia

Postby lukeaday » Sat Aug 11, 2012 11:29 am

Yep, reach under and help the thread up by pushing up while unscrewing or squeze the 4 tags together.
Lost count of how many intake/grills I have removed to do bumper blackout wraps!
Official ClubCJ Sponsor.
Image
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 6 guests