***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Front grill Ralliart badge

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
kinsei74
INACTIVE Member Account
Posts: 19
Joined: Wed Dec 09, 2009 12:34 pm
Location: Gold Coast, Australia

Front grill Ralliart badge

Postby kinsei74 » Tue Jan 26, 2010 10:33 am

Hey guys,

Just a follow up from another post about installing the front grill RA badge and, more specifically, getting it straight. Are there any tips anyone can pass on?

Cheers.

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Jan 26, 2010 10:34 am

ofey should be able to help you with that - his pretty switched on with that stuff.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Tue Jan 26, 2010 10:55 am

I have the same issue, I asked Ofey and he advised me that this badge is designed for the RA grille and not ours, so we may need to make a custom bracket out of a piece of metal to make it sit right.

I still haven't got around to doing mine, if you get yours done let me know how :)
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
kinsei74
INACTIVE Member Account
Posts: 19
Joined: Wed Dec 09, 2009 12:34 pm
Location: Gold Coast, Australia

Postby kinsei74 » Tue Jan 26, 2010 11:13 am

I'm not real handy, so I don't think it will be any time soon... I have a service coming up and was even thinking of asking if the dealer could put it on as they owe me a few favours - not least of which is replacing a section of the driver's door scuff trim which was all marked and scratched when I took delivery of my car and reapplying all of the carbon fibre dash/gearbox trim which pops off every time I go over a bump...

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Jan 26, 2010 12:41 pm

you serious - thats not right at all - id take it back and go nuts at them.
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jan 26, 2010 1:39 pm

Let me guess...

Zupps at Southport?

User avatar
kinsei74
INACTIVE Member Account
Posts: 19
Joined: Wed Dec 09, 2009 12:34 pm
Location: Gold Coast, Australia

Postby kinsei74 » Tue Jan 26, 2010 1:43 pm

I tried to but the salesman never returned calls/was impossible to get hold of so I went to the dealer principal and finally got some action. Would you believe when my decal sticker finally came in (after me calling and emailing them every few days for two weeks) I had to give a hand to the salesman to put it on. Talk about amateur hour. Needless to say my customer survey comments weren't at all flattering. Really surprising and really disappointing considering my RX is the first new car I've ever bought...

User avatar
kinsei74
INACTIVE Member Account
Posts: 19
Joined: Wed Dec 09, 2009 12:34 pm
Location: Gold Coast, Australia

Postby kinsei74 » Tue Jan 26, 2010 1:46 pm

Right on the money SIR-VRX, does their reputation proceed them??? Worst customer service I have experienced in a long, long time and for anything - let alone a $30,000 motor vehicle. The local Toyota service department for our other car was far, far superior for a $200-$300 job.

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jan 26, 2010 1:51 pm

They don't have a good REP at all... From what I've heard.

Every other Mitsubishi dealership up here seems to be pretty good though.

Hotlanc is fighting with them ATM as they scratched his interior door plastics and his side skirt is sitting out off the car about 3mm but they tried to tell him "That wasn't us" and "They're all meant to be like that" yet the side skirt on the other side is fine and on every other car in the yard it is fine also... Hmm...

Avoid them like the plague. Take your warranty issues and servicing to another dealership.

User avatar
drake89
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 478
Joined: Tue Sep 08, 2009 4:21 pm
Location: Gold Coast, Australia
Contact:

Postby drake89 » Tue Jan 26, 2010 10:42 pm

i super glued mine on today. lol

User avatar
kinsei74
INACTIVE Member Account
Posts: 19
Joined: Wed Dec 09, 2009 12:34 pm
Location: Gold Coast, Australia

Postby kinsei74 » Wed Jan 27, 2010 12:42 am

I was definitely thinking of going elsewhere, but was worried that as the salesman who sold me my car is the only one who's seen the scuff marks and scratches, another dealership wouldn't honour my claim. Even though my car's still only done 750km or so, they may just put it down to normal wear and tear. There was a handful of spots both inside and out where small scratches and marks were obvious apart from what I've mentioned so I was not (and still not am) happy. I may be pedantic, but I paid for new and that is precisely what I expect - not next to good as.

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Wed Jan 27, 2010 6:28 am

Exactly! if you buy a new car you want everything to be new not scratched or broken. I'm sure most of us would do the same thing in the same circsumstance
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Wed Jan 27, 2010 7:03 am

kinsei74 wrote:Right on the money SIR-VRX, does their reputation proceed them??? Worst customer service I have experienced in a long, long time and for anything - let alone a $30,000 motor vehicle. The local Toyota service department for our other car was far, far superior for a $200-$300 job.


I hope you didn't pay 30 grand for an RX :shock: :shock: ???

To get the badge to sit straight, you might need to do what I did and sand off a part of the badge base that has the triangle shape on it - this is what prevents from the badge sitting straght on our grilles - as mentioned before, it was made for the Ralliart grille, which is different.
ClubCJ's first Sportback

User avatar
kinsei74
INACTIVE Member Account
Posts: 19
Joined: Wed Dec 09, 2009 12:34 pm
Location: Gold Coast, Australia

Postby kinsei74 » Wed Jan 27, 2010 9:32 am

I actually paid more than $30,000... because I put a heap of extras on like a sunroof, window tints, fog lamps, rear park sensors, etc. etc. Made me even madder that after I went for all factory stuff, they still didn't look after me.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Jan 27, 2010 9:43 am

kinsei74: you don't have to feel hard done by. Most of the stuff you got are FACTORY options. So long as you didn't ask for OEM parts like mats and perhaps the audio control switch, you're fine.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 17 guests